Two dimensional pressure field determination on flapping flat plate from PIV measurements

2015-10-29
Günaydınoğlu, Erkan
Kurtuluş, Dilek Funda

Suggestions

Two dimensional transient coupled analysis of a finned tube adsorbent bed for a thermal wave cycle
ÇAĞLAR, AHMET; Yamali, Cemil; Baker, Derek Keıth (Elsevier BV, 2013-11-01)
Poor heat and mass transfer inside the adsorbent bed of adsorption cooling cycles can cause low system performance. A 2-D mathematical model of the heat and mass transfer inside a cylindrical adsorption bed for a thermal wave adsorption cycle is developed, with a heat transfer fluid flowing through an inner tube and the adsorbent in the annulus. A parametric study is carried out for determining factors that enhance the heat transfer and mass transfer inside the adsorbent bed. The effects of several design a...
Three dimensional velocity measurement behind an axial flow fan
Ayaz, Yalçın; Akmandor, I. Sinan; Department of Aeronautical Engineering (1988)
Two dimensional modeling of electromagnetic radiation and scattering by spectral element method
Mahariq, İbrahim; Tarman, Işık Hakan; Kuzuoğlu, Mustafa; Department of Engineering Sciences (2014)
In this thesis, the spectral element method is utilized in numerical modeling of two-dimensional, frequency-domain electromagnetic scattering and radiation problems. We perform domain truncation by the well-known perfectly matched layer (PML) and provide the corresponding formulation. The attenuation factor associated with the PML formulation is optimized so that the best accuracy is achieved for a wide range of Gauss- Legendre -Lobatto grids per wavelength. The optimality of the provided attenuation factor...
Three dimensional numerical modelling of discontinuous rocks by using distinct element method
Koçal, Arman; Karpuz, Celal; Department of Mining Engineering (2008)
Shear strength characterization of discontinuities is an important concept for slope design in discontinuous rocks. This study presents the development of a methodology for implementing Barton-Bandis empirical shear strength failure criterion in three dimensional distinct element code, 3DEC, and verification of this methodology. Normal and shear deformation characteristics of discontinuities and their relations to the discontinuity surface characteristics have been reviewed in detail. First, a C++ dynamic l...
Three dimensional fracture analysis of FGM coatings under thermomechanical loading
Yildirim, B; Dağ, Serkan; Erdogan, E (Springer Science and Business Media LLC, 2005-04-01)
The main objective of this study is to examine the three dimensional surface crack problems in functionally graded coatings subjected to mode I mechanical or transient thermal loading. The surface cracks are assumed to have a semi-elliptical crack front profile of arbitrary aspect ratio. The cracks are embedded in the functionally graded material (FGM) coating which is perfectly bonded to a homogeneous substrate. A three dimensional finite element method is used to solve the thermal and structural problems....
Citation Formats
E. Günaydınoğlu and D. F. Kurtuluş, “Two dimensional pressure field determination on flapping flat plate from PIV measurements,” presented at the Workshop on Non-Intrusive Measurements of Unsteady Flows and Aerodynamics, (27 - 29 Ekim 2015), Poitiers, Fransa, 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84968.