Evaluation of the Combustion Behavior of Coal Briquettes as a Function of Briquetting Parameters

Altun, Naci Emre
Bağcı, A S


Evaluation of the effects of photovoltaic systems on voltage quality
Şengül, Deniz; Göl, Murat (2016-09-20)
Because of the governmental incentives, the distributed photovoltaic systems are populating rapidly in Turkish Electric System. This work aims to evaluate the effects of those plants to the electrical system in terms of voltage quality by focusing on the specific example of the solar plant being built under the National Solar Power Plant Development Project (Milli Gunes Enerjisi Santrali Gelistirilmesi Projesi, MILGES). In order to be able to evaluate the effects of the PV system under the most challenging ...
Karım Zadeh Naghshıneh, Shaghayegh; Ozsarac, Volkan; Askan Gündoğan, Ayşegül; Erberik, Murat Altuğ (null; 2018-06-25)
In recent years, there has been a strong interest on energy-based design and assessment methods for structural systems. The underlying research has been mostly performed using real ground motion records taken from existing earthquakes worldwide. Results may involve bias due to lack of homogeneity of the available ground motion dataset in terms of magnitudes, source to site distances or soil conditions. In this study a large set of ground motion records is simulated within a parametric exercise to investigat...
Evaluation of the Performance Limit States of Reinforced Concrete Columns in View of Experimental Observations
Acun, Bora; Sucuoğlu, Haluk (2011-07-01)
In this study, twelve full-scale column specimens designed for pure flexure were tested under repetitive displacement cycles with high amplitude. Two typical column designs were employed in the production of samples representing sub-standard and code-conforming columns, respectively. The main variable in the experiments was the histories of the imposed displacement amplitudes. The deformation-based performance limits proposed by Eurocode 8, ASCE/SEI 41 and Turkish Seismic Code (TDY-2007) for sub-standard co...
Analysis of the thermomechanical behavior of [0] and [0/90] SCS-6/Timetal 21S composites
Çöker, Demirkan; Nicholas, Theodore (null; 1993-12-01)
Micromechanical modeling is used to determine the stresses and strains due to both mechanical and thermal loads in [0] and [0/90] titanium matrix composites (TMCs) subjected to processing and thermomechanical fatigue (TMF) loading conditions. The concentric cylinder model, due to its simple geometry as well as its capability to capture the three-dimensional aspects of the stress state in a composite, is used to determine the stresses in a unidirectional composite. A representative volume element of the comp...
Evaluation of the effects of the parameter variations on the performance of the feed drive systems for N.C. machine tools
Güzelbey, İbrahim Halil; Filiz, İ. Hüseyin; Department of Mechanical Engineering (1985)
Citation Formats
N. E. Altun and A. S. Bağcı, “Evaluation of the Combustion Behavior of Coal Briquettes as a Function of Briquetting Parameters,” 2004, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/86477.