Pearlite spheroidization in 19%Si-Eutectoid steel.

1983
Özbilen, Sedat
Show full item record
107
views
0
downloads
https://hdl.handle.net/11511/9338
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Nickel titanium alloys as orthodontic archwires: A narrative review
Uysal, Idil; Yilmaz, Bengi; Atilla, Aykan Onur; Evis, Zafer (2022-12-01)
Nickel-titanium (NiTi) archwires have been widely used in orthodontic treatments at the aligning and leveling step which is the initial stage of the treatment. This review presents the concepts related to NiTi archwires from the materials science and engineering perspective. Analysis of the research profile showed that mechanical properties as a research topic constituted 25.9 % of the research articles published in last two decades. The effects of processing parameters, stress and temperature on phase tran...
Glass fiber reinforced sealants for solid oxide fuel cells
Timurkutluk, Bora; Altan, Tolga; Celik, Selahattin; Timurkutluk, Cigdem; PALACI, Yüksel (Elsevier BV, 2019-07-05)
Novel sealants for solid oxide fuel cells are developed by addition of glass fiber into glass ceramic as a reinforcement material. Various sealants including three different fiberglass types and four different structural designs are fabricated. The mechanical and sealing performances of the sealants are investigated via tensile and short stack leakage tests, respectively. The tensile tests reveal that the fracture strength of the sealants varies depending on the type and number of the glass fiber used. In g...
Crystalline Si solar cells with micro/nano holes and pillars prepared by reactive ion etching and metal assisted etching
Altınoluk, Hayriye Serra; Baytemir, Gülsen; Turan, Raşit (null; 2017-12-04)
Dielectric and piezoelectric properties of PZT ceramics doped with strontium and lanthanum
Kalem, Volkan; Çam, İbrahim; Timucin, Muharrem (Elsevier BV, 2011-05-01)
PZT based piezoelectric ceramics obtained by doping with various levels of Sr2+ and La3+, designated as PSLZT, were prepared by conventional processing techniques. The effects of Sr2+ and La3+ additions, and that of the Zr/Ti ratio on microstructure, on phase constitution, and on the dielectric and piezoelectric properties were investigated. XRD data revealed that all PSLZT compositions had perovskite structure in which increasing Sr and/or decreasing Zr/Ti ratio increased the tetragonality. In PSLZT cerami...
Cement production by cement-bonded wood particleboard wastes
Yilmaz, Mustafa; Tokyay, Mustafa; Yaman, İsmail Özgür (2016-01-01)
To improve the sustainability of cement and concrete production, there is an increasing trend towards using industrial wastes throughout their production processes. The aim is to find new resources that can be used in any step of cement and concrete production and to find solutions to many problems related to the disposal of wastes. This article discusses the use of wastes generated from cement-bonded wood particle board (CB) manufacturing in cement production. CB waste, which basically contains wood chips ...
Citation Formats
S. Özbilen, “Pearlite spheroidization in 19%Si-Eutectoid steel.,” Middle East Technical University, 1983.
METU IIS - Integrated Information Service open@metu.edu.tr