Sensitivity analysis and history matching of a slightly compressible, single phase radial flow in a homogeneous and isotropic reservoir model.

Date

1980

Author

Khan, Ahmed Saeed

Metadata

Show full item record

Item Usage Stats

31
views

0
downloads

URI

https://hdl.handle.net/11511/9372

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Sensitivity analysis of 2-D flood inundation model LISFLOOD-FP with respect to spatial resolution and roughness parameter Kıyıcı, Ezgi; Akyürek, Sevda Zuhal; Department of Civil Engineering (2019) One of the most common disasters in the world is flooding and it’s well known that it causes environmental, social and economic damages. Since these damages could be severe and destructive due to drivers such as climate change and humane factors, the necessity of flood management studies is revealed. Europe has recognized the need for creating flood risk maps and flood hazard maps. 1-D and 2-D hydraulic models have been used to obtain these maps. This study is focused on the sensitivity of a 2-D hydraulic m...
SENSITIVITY ANALYSIS AND INVERSE PROBLEM SOLUTION OF ELECTRICAL-IMPEDANCE TOMOGRAPHY USING INDUCED CURRENTS Gençer, Nevzat Güneri; IDER, YZ; KUZUOGLU, M (1991-01-01)
Sensitivity Analysis of Distortion of Carburized Steel Shafts Using Computer Simulations Yazır, Büşra; Evcil, Elif; Yıldız, Seçil; Davut, Kemal; Şimşir, Caner (null; 2016-12-01) Carburizing and subsequent quenching heat treatments are commonly used industrial processes to improve the properties and performance of steel shafts. Undesired dimensional and shape changes (distortion) related to these treatments are still the most frequent reason for expensive and time consuming corrective operations, low performance during service and even product rejection. The major aim of this study is to identify the suitable control parameters for subsequent optimization of the carburized quenching...
Sensitivity analysis for piezoelectric energy harvester and bluff body design toward underwater pipeline monitoring Qureshi , Fassahat Ullah Qureshi; Muhtaroglu, Ali; Tuncay, Kağan (2017-01-01) Monitoring of underwater pipelines through wireless sensor nodes (WSNs) is an important area of research especially for locations such as underground or underwater pipelines, where it is costly to replace batteries. In this study, a finite element sensitivity and comparative analysis for piezoelectric (PZT) energy harvester operating in a fluid flow is done to power underwater in-pipe WSNs. Two types of bluff bodies D and I-shaped are used for comparison. Finite element simulations results show that PZT ene...
Sensitivity Analysis of Major Drilling Parameters on Cuttings Transport during Drilling Highly-inclined Wells Ozbayoglu, E. M.; Miska, S. Z.; Takach, N.; Reed, T. (Informa UK Limited, 2009-01-01) In this study, a layered cuttings transport model is developed for high-angle and horizontal wells, which can be used for incompressible non-Newtonian fluids as well as compressible non-Newtonian fluids (i.e., foams). The effects of major drilling parameters, such as flow rate, rate of penetration, fluid density, viscosity, gas ratio, cuttings size, cuttings density, wellbore inclination and eccentricity of the drillsting on cuttings transport efficiency are analyzed. The major findings from this study are,...

Citation Formats

A. S. Khan, “Sensitivity analysis and history matching of a slightly compressible, single phase radial flow in a homogeneous and isotropic reservoir model.,” Middle East Technical University, 1980.