Polymer flow behaviour through unconsolidated limestone packs as applied to enhanced oil recovery.

Date

1984

Author

Şengül, Mahmut

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://hdl.handle.net/11511/9382

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Polymer gel conformance on oil recovery in fractured medium: Visualization and verification Canbolat, Serhat; Parlaktuna, Mahmut (Elsevier BV, 2019-11-01) Due to complexity and heterogeneity of the geological patterns of fractured reservoirs recovery estimations are considered to be extremely challenging. These fractures form complicated paths for reservoir characterization and fluid movement that ultimately impacts production performance and recovery.
Polymer/oil relative permeabilities in carbonate reservoirs Cankara, İlker; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2005) In the history of a reservoir, after the period of primary production, about 30 to 40%, of the original oil in place may be produced using a secondary recovery mechanism. Polymer injection, which is classified as a tertiary method, can be applied to the remaining oil in place. In this thesis, oil/water relative permeabilities, effect of polymer injection on end point relative permeabilities and residual oil saturations in heterogeneous carbonate reservoirs were investigated. Numereous core flood experiments...
Polymer augmented waterflooding in a resevoir with a bottom water zone Hodaie, Homayoun; Bağcı, Ali Suat; Department of Petroleum Engineering (1992)
Polymer fractionation studies on polyacrtlamide samples. Ergöz, Ertuğrul; Department of Chemistry (1964)
Plastic rotation capacity of RC columns under biaxial seismic demands Özcan, Okan; Binici, Barış (2023-03-01) Seismic performance of reinforced concrete (RC) columns should be evaluated considering biaxial demands for a more realistic assessment. However, most of the current seismic assessment regulations stipulate rotation capacity estimations considering only uniaxial bending test database. The effect of seismic demands in one direction may have a detrimental effect in the deformation capacity of the other direction. In the past studies, the influence of biaxial loading patterns/paths/histories, axial load level,...

Citation Formats

M. Şengül, “Polymer flow behaviour through unconsolidated limestone packs as applied to enhanced oil recovery.,” Middle East Technical University, 1984.