Two dimensional cutting stock problem with multiple stock sizes

Date

2022-01-01

Author

Ayasandır, Umutcan
Azizoğlu, Meral

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

218
views

0
downloads

URI

https://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijps
https://hdl.handle.net/11511/94419

Journal

International Journal of Planning and Scheduling

Collections

Department of Industrial Engineering, Article

Suggestions

OpenMETU
Core

Two dimensional cutting stock problem with multiple stock sizes Ayasandır, Umutcan; Azizoğlu, Meral; Department of Industrial Engineering (2019) In this study, we consider a two dimensional cutting stock problem with multiple stock sizes and two stage guillotine cuts. Our objective is to maximize the difference between total revenue over all items and total cost over all used panels. We propose two mathematical models and discuss their relative performances. We enhance the performances of the models by incorporating the properties of optimal solution that we derive. The results of our computational study have revealed the satisfactory performance of...
Two Dimensional Cutting Stock Problem With Multiple Stock Sizes Ayasandır, Umutcan; Azizoğlu, Meral (2022-1-01)
Two dimensional finite element modeling for the multi tier pile wall with anchor shoring sysytem Özyürek, Yunus Emre; Huvaj Sarıhan, Nejan; Department of Civil Engineering (2019) For deep excavations (such as greater than 20-25 m excavation depths) in urban areas, where there is strict deformation limits, multi-tier pile wall shoring system with soil anchors is becoming more widely used, since the system with one level of piles becomes insufficient or unfeasible. In this study, parameters affecting the behavior of multi-tier pile wall retaining system is investigated via two-dimensional finite element method. Firstly, a 30 m excavation is carried out with a multi-tier shoring system...
Two Dimensional DOA Estimation using Uniform Rectangular Array with Mutual Coupling Caliskan, Mustafa; Tuncer, Temel Engin (2014-04-25) In this study, joint estimation of azimuth and elevation angles with uniform rectangular array(URA) in the presence of mutual coupling is discussed. Mutual coupling coefficients are also estimated with the estimated arrival angles. By using these coupling coefficient estimates, two dimensional refined search of direction of arrival angles(DOA) is done. Several Monte Carlo experiments are performed and it is observed that the refined angle estimates are more accurate compared to the initial estimates which d...
Three dimensional rocket nozzle design using adjoint method Eyi, Sinan (2013-01-01) A design optimization method based on three dimensional Euler equations is developed. A finite volume method is implemented to discretize the Euler equations. Newton’s method is used to solve the discretized form of Euler equations. Newton’s method requires the calculation of the Jacobian matrix which is the derivative of the residual vector with respect to the flux vector. Different upwind methods are used in the calculation of flux vectors. Numerical and analytical methods are utilized in the evaluation o...

Citation Formats

U. Ayasandır and M. Azizoğlu, “Two dimensional cutting stock problem with multiple stock sizes ,” International Journal of Planning and Scheduling, pp. 1–20, 2022, Accessed: 00, 2021. [Online]. Available: https://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijps.