Simulation of an industrial spaghetti drying process with the data optained in a batch system

Download

056596.pdf

Date

1996

Author

Küçük, Rıdvan

Metadata

Show full item record

Item Usage Stats

45
views

0
downloads

URI

https://hdl.handle.net/11511/9487

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Simulation of a shunt active power filter using PSCAD/EMTDC Balbay, M. Serkan; Çadırcı, Işık; Department of Electrical and Electronics Engineering (2000)
Simulation of an integrated microfluidic device for bioparticle wash separation and concentration Çetin, Barbaros; Süleyman, Büyükkoçak; Soheila, Zeinali; Özer, Mehmet Bülent (null; 2013-12-14) Washing, separation and concentration of bioparticles are key operations for many biological and chemical analyses. In this study, the simulation of an integrated microfluidic device is studied. The proposed device has the capability to wash the bioparticles (transferring the bioparticles from one buffer solution to another), to separate the particles based on their dielectric properties and to concentrate the bioparticles. Washing and concentration of bioparticles are performed by acoustophoresis and the s...
Simulation of vapor compression refrigeration cycle for a household refrigerator Acar, Yılmaz; Oskay, Rüknettin; Arınç, Faruk; Department of Mechanical Engineering (1998)
Simulation of Rapidly Maneuvering Airfoils with Synthetic Jet Actuators Jee, SolKeun; Lopez Mejia, Omar D.; Moser, Robert D.; Muse, Jonathan A.; Kutay, Ali Türker; Calise, Anthony J. (American Institute of Aeronautics and Astronautics (AIAA), 2013-08-01) Synthetic jet actuators are investigated for rapidly maneuvering airfoils that are regulated by a closed-loop control system. To support active flow-control simulations performed here, the closed-loop system and vehicle dynamics are coupled with computational fluid dynamics. High-frequency sinusoidal pitching simulations with and without synthetic jet actuation indicate that the current synthetic jet actuators provide bidirectional change in aerodynamic forces during rapid maneuvers whose time scales are of...
Simulation of the Transient Response of a Helicopter Turboshaft Engine to Hot-Gas Ingestion Uzol, Oğuz; Yavrucuk, İlkay (2008-06-09) Hot-Gas Ingestion (HGI) to the engines can potentially occur when a rotorcraft or a VTOL/STOVL fixed-wing aircraft is operating in close proximity to the ground. Especially for helicopters, due to the rotor downwash hot exhaust gases get recirculated into the engine inlet. Similar conditions may also occur due to the ingestion of hot exhaust gases from rocket launchers or gun fire. In this study, we present the results of a simulation of the transient response of a helicopter turboshaft engine to HGI. Speci...

Citation Formats

R. Küçük, “Simulation of an industrial spaghetti drying process with the data optained in a batch system,” Middle East Technical University, 1996.