Interface Shear Strength Properties of Geofoam

2022-09-07
Kefci, Yavuzhan
Huvaj Sarıhan, Nejan
7th European Geosynthetics Conference (EuroGeo7)

Suggestions

Interface crack problems in graded orthotropic media: Analytical and computational approaches
Dağ, Serkan; Erdogan, F (Springer Science and Business Media LLC, 2004-11-01)
Interface crack problems in graded orthotropic media are considered using analytical and computational techniques. In the analytical formulation an interface crack between a graded orthotropic coating and a homogeneous orthotropic substrate is considered. The principal axes of orthotropy are assumed to be parallel and perpendicular to the crack plane. Mechanical properties of the medium are assumed to be continuous with discontinuous derivatives at the interface. The problem is formulated in terms of the av...
Interface stability problem towards the end of THM growth of cadmium zinc telluride crystals
Ünal, Mustafa; Balbaşı, Özden Başar; Genç, Ayşe Merve; Parlak, Mehmet; Turan, Raşit (2022-04-15)
Growth of CdZnTe crystals by Travelling Heater Method (THM) is widely investigated by different groups. Interface shape and stability are critical parameters for the successful growth of high-quality CZT crystals. Even though interface stability could be achieved for a significant portion of the CZT ingot, the situation towards the end of the growth is not well studied and understood. In this study, interface stability and the change of crystal quality towards the end of the growth are examined. The change ...
Interface circuit development and validation for hybrid piezoelectric-thermoelectric energy harvesters
Külah, Haluk(2016-12-31)
Wireless sensor networks (WSNs) are critical components of sustainable operations in every major industry. First stage of the WSN in the figure can potentially be fully supported by renewable energy sources. Use of non-traditional ambient energy sources such as low frequency vibrations and temperature differences in the environment in a set of emerging embedded and smart applications, some of which designated in recent Horizon 2020 documents.Our group, which consists of members of MEMS Center at METU Ankar...
Interface passivation of perovskite solar cells with novel cations
Çel, Gülsevim Bensu; Günbaş, Emrullah Görkem; Yerci, Selçuk; Department of Micro and Nanotechnology (2022-8)
Interface engineering and surface defect passivation play an important role in the development of state-of-the-art perovskite solar cells. Forming an additional two-dimensional (2D) layer on top of the primary perovskite absorber after treatment with organic spacers not only passivates defects and improves the device performance, but also enhances stability. In this study, two novel cations, that are 2,6-methoxy-phenylethyl ammonium iodide (2,6-MeO-PEAI) and 3,5-methoxy-phenylethyl ammonium iodide (3,5-MeO-...
CONTACT STRESS AND SURFACE FATIGUE FAILURE ANALYSIS FOR COMBINED NORMAL AND TANGENTIAL LOADING
Arıkan, Mehmet Ali Sahir (1994-01-01)
Contact stresses in bodies in line contact are determined by using the analytical expressions developed for two elastic bodies held in contact by forces normal to the area of contact and accompanied by frictional (tangential) forces. Variations of the stresses in the contact region, and effect of coefficient of friction on these stresses is investigated. Maximum values of principal, maximum shearing and von Mises stresses are determined for static failure analysis; mean and alternating von Mises stresses ...
Citation Formats
Y. Kefci and N. Huvaj Sarıhan, “Interface Shear Strength Properties of Geofoam,” presented at the 7th European Geosynthetics Conference (EuroGeo7), Warszawa, Polonya, 2022, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/99243.