TENSILE TESTING OF REPAIRED COMPOSITE SPECIMENS WITH DIC MEASUREMENT AND FEM CORRELATION

Date

2021-09-10

Author

Ekren, Mustafa
Kayran, Altan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

19
views

0
downloads

URI

http://aiac.ae.metu.edu.tr/paper.php?No=AIAC-2021-063
https://hdl.handle.net/11511/100542

Conference Name

11th ANKARA INTERNATIONAL AEROSPACE CONFERENCE

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Tensile splitting test applied to reinforced concrete specimens. Dülgeroğlu, Sina; Department of Civil Engineering (1965)
Tensile-Creep Test Specimen Preparation Practices of Surface Support Liners Güner, Doğukan; Öztürk, Hasan (2017-09-15) Ground support has always been considered as a challenging issue in all underground operations. Many forms of support systems and supporting techniques are available in the mining/tunnelling industry. In the last two decades, a new polymer based material, Thin Spray-on Liner (TSL), has attained a place in the market as an alternative to the current areal ground support systems. Although TSL provides numerous merits and has different application purposes, the knowledge on mechanical properties and performanc...
Tensile mode fracture toughness experiments on andesite rock using disc and semi-disc bend geometries with varying loading spans Tutluoglu, Levent; Batan, Ceren; Aliha, M.R.M. (2022-06-01) Purpose of this research is to investigate the effect of loading span on mode I fracture toughness for tests conducted by three-point bend geometries. Mode I fracture toughness tests were conducted on Ankara Golbasi Andesite with straight notched disc bending (SNDB) specimens of thicknesses 50 mm and 60 mm. Loading spans were varied in a wide range between 40 mm and 90 mm corresponding to span/radius ratios of S/R = 0.40 to 0.90. Three-point bend tests were conducted with the semi-circular bending (SCB) cor...
Tensile strength of asphaltic mixtures under split tension test comditions. Tunc, Argun; Department of Civil Engineering (1985)
Tensile properties and microstructure of additively manufactured Grade 91 steel for nuclear applications Eftink, Benjamin P.; Vega, Daniel A.; El Atwani, Osman; Sprouster, David J.; Yoo, Yung Suk J.; Steckley, Todd E.; Aydoğan Güngör, Eda; Cady, Carl M.; Al-Sheikhly, Mohamad; Lienert, Thomas J.; Maloy, Stuart A. (Elsevier BV, 2021-02-01) © 2020 Elsevier B.V.Laser powder bed additively manufactured Grade 91 composition steel was investigated in comparison to wrought Grade 91 steel in terms of microstructure and mechanical properties. As-deposited additively manufactured Grade 91 steel had a microstructure of lower bainitic regions surrounded by martensite. This is significantly different from the typical tempered martensitic microstructure of conventionally produced Grade 91 steel. The as-deposited additively manufactured material had excell...

Citation Formats

M. Ekren and A. Kayran, “TENSILE TESTING OF REPAIRED COMPOSITE SPECIMENS WITH DIC MEASUREMENT AND FEM CORRELATION,” presented at the 11th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 2021, Accessed: 00, 2022. [Online]. Available: http://aiac.ae.metu.edu.tr/paper.php?No=AIAC-2021-063.