Finite element modelling of non-axisymetric deep drawing

Download

068552.pdf

Date

1997

Author

Tendürüs, Cengiz

Metadata

Show full item record

Item Usage Stats

73
views

0
downloads

URI

https://hdl.handle.net/11511/10582

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Finite Element Modeling of Blank Optimization in the Deep-Drawing Process Tendürüs, Cengiz; Kaftanoğlu, Bilgin; Darendeliler, Haluk (1997-06-21)
Finite Element Modeling of Three Dimensional Spherulite Microstructures Oktay, Hasan Emre; Gürses, Ercan (2015-09-14)
Finite element modeling of dynamic interfacial rupture and sliding Çöker, Demirkan; Needleman, A. (null; 2005-12-01) Analyses of fracture and sliding under dynamic loading conditions are discussed. The calculations are carried out within a framework where two constitutive relations are used: a volumetric constitutive relation between stress and strain and a surface constitutive relation that characterizes the fracture and/or frictional behavior of an interface. Attention is confined to two dimensional plane stress or plane strain analyses. Issues that are addressed including limiting rupture and sliding speeds along inter...
Finite element modeling of scattering from objects in rectangular waveguides Gülbaş, Hüseyin; Kuzuoğlu, Mustafa; Özlem, Özgün; Department of Electrical and Electronics Engineering (2017) Numerical analysis of scattering parameters of split ring resonators which are one of the microwave circuit elements is performed by the Finite Element Method in this thesis. The fundamentals of the model and analysis method will be discussed firstly. Afterwards, the basics of Finite Element Method including weak variational form of the wave equation, 3D formulations and application to scattering parameters will be presented. The concepts of Perfectly Matched Layer and resonators will be examined in detail....
Finite element modeling of stress evolution in quenching process Doğu, Doruk; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2005) In this thesis the finite element computer code QUEANA simulating the quenching of axisymetric parts and determining the residual stress state was improved by adding pre- and post-processors. The code was further verified by additional numerical experiments and comparison of the results with commercial software أMARCؤ. The possible applications of this code are optimization of industrial quenching processes by controlling the evolution of internal stresses and dimensional changes.

Citation Formats

C. Tendürüs, “Finite element modelling of non-axisymetric deep drawing,” Middle East Technical University, 1997.