Performance analysis of active bed section of an atmospheric bubbling fluidized bed combustor

Download
114964.pdf
2001
Bektaş, Savaş
Show full item record
31
views
0
downloads
https://hdl.handle.net/11511/10923
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Performance assessment of cement grout borehole plugs in basalt
Akgün, Haluk (Elsevier BV, 1994-01-01)
Flow tests have been conducted on expansive cement grout plugs with diameters of 160 mm and 200 mm, and length-to-diameter ratios of one, in boreholes in basalt blocks and in steel pipes. Two types of flow tests have been performed: pseudo-constant head tests and transient pulse tests. Hydration temperatures of cement grout plugs have been monitored in steel pipes with inside diameters ranging from 110 mm to 200 mm. During flow tests, basalt blocks have fractured, presumably due to water injection pressure,...
Performance analysis of drilling fluid liquid lubricants
Sonmez, Ahmet; Kök, Mustafa Verşan; Ozel, Reha (Elsevier BV, 2013-08-01)
Excessive torque is one of the most important problems in oil/gas drilling industry. Friction between wellbore/casing and drill string causes excessive torque. This study discusses performance analysis of drilling fluid lubricants, which are used as friction reducers in well-bores. Three different types of chemical commercial lubricants, which are fatty acid and glyceride based, triglyceride and vegetable oil based and polypropylene glycol based, diesel oil, and crude oil, which consists of different API gr...
performance analysis of drilling fluid liquid lubricants
Sönmez, Ahmet; Kök, Mustafa Verşan; Department of Petroleum and Natural Gas Engineering (2011)
Excessive torque is one of the most important problems in oil/gas drilling industry. Friction between wellbore/casing and drill string causes excessive torque. This study discusses performance analysis of drilling fluid lubricants, which are used as friction reducers in well-bore. Three different types of commercial chemical lubricants, which are fatty acid and glycerid based, triglycerid and vegetable oil based and polypropylene glycol based, diesel oil, and crude oil, which consists of different API gravi...
Performance analysis of a solar water heater module
Gürsoy, Ahmet; Taşdemiroğlu, Ersoy; Department of Mechanical Engineering (1990)
PERFORMANCE ASSESSMENT OF COMMERCIAL HEAT PIPES WITH SINTERED AND GROOVED WICKS UNDER NATURAL CONVECTION
Atay, Atakan; Sariarslan, Busra; Kuscu, Yigit F.; Saygan, Samet; Akkus, Yigit; Gurer, A. Turker; Cetin, Barbaros; Dursunkaya, Zafer (2019-01-01)
Heat pipes are widely used in thermal management of high heat flux devices due to their ability of removing high heat loads with small temperature differences. While the thermal conductivity of standard metal coolers is approximately 100-500 W/m.K, effective thermal conductivities of heat pipes, which utilize phase-change heat transfer, can reach up to 50,000 W/m.K. In industrial applications, commercially available heat pipes are commonly preferred by thermal engineers due to their low cost and versatility...
Citation Formats
S. Bektaş, “Performance analysis of active bed section of an atmospheric bubbling fluidized bed combustor,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr