Design analysis of automobile brake systems.

Download
119011.pdf
2002
Daş, Hüseyin Zafer
Show full item record
152
views
0
downloads
https://hdl.handle.net/11511/12226
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design optimization of domestic unit heaters.
Barakat, Abdelwahab; Department of Mechanical Engineering (1973)
Design Optimization of Variable Stiffness Composite Laminates Using Surrogate Models for Compliance and Buckling Load
İnci, Hasan; Kayran, Altan (2017-09-22)
Usage of composite materials in aerospace industry has never been so wide in our world. Starting from the development of composites, the analyses were only done for straight fiber composites. With the improved manufacturing capabilities, designers have the ability to design more complex shapes for composites, which allows more efficient structures. In the past two decades, variable stiffness (VS) composite laminates are introduced to the literature. Within these two decades, researchers working on VS concep...
Design principles and cost estimations for sewerage systems.
Balci, Huseyin Gazi; Department of Civil Engineering (1980)
Design optimization of whiffletree systems for wind turbine blade testing
Yeniceli, Süleyman Cem; Kayran, Altan; Department of Aerospace Engineering (2014)
In this thesis, the design optimization of a whiffletree system, which is used to simulate the loads for a selected design load case by applying discrete test loads on a wind turbine blade, is performed. Firstly, distributed design loads are calculated for the selected load case by using Microsoft (MS) EXCEL. Then, the test load optimization is performed with the Solver Add-In of the MS EXCEL to find the optimum locations of the load saddles which give the best moment distribution along the blade span accor...
Design Studies of Axial Vircator for High Power Microwave Generation
KÜÇÜK, İBRAHİM SEMİH; TİMUR, BÜŞRA; Tanc, Zafer; Demir, Şimşek (2017-09-27)
This paper presents design and simulation results of the cylindrical axial virtual cathode oscillator which is frequently used to damage electronic equipment by generating High Power Microwaves (HPM). Simulations are performed in MAGIC Tool Suite which uses FDTD-PIC algorithm to solve particle beam and field interactions. During the design procedure, AK Gap is changed from 5 mm to 12 mm and the scaling law is verified by simulation results. 9 mm AK gap values are selected as the most suitable one when outpu...
Citation Formats
H. Z. Daş, “Design analysis of automobile brake systems.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr