Performance calculation of single phase permanent magnet synchronous motors for design optimization.

Dağ, Bülent


Performance Calculation of SR Motors for Optimum Design and a Washing Machine Application
Ertan, Hulusi Bülent (2008-09-09)
This paper aims to develop an approach for performance calculation of an SR motor, which is suitable for use within mathematical design optimization. For this reason the requirement is to develop procedures, which are both accurate and fast. The procedures adopted here rely on flux-linkage-current-position curves of the motor. A series of tests are carried out on a test motor. The results are compared with estimations from the developed algorithms. It is shown that the current waveform, torque-speed curve, ...
Performance predictions of a gasketed plate heat exchanger by using computational fluid dynamics
Sert, İsmail Ozan; Sezer Uzol, Nilay; Güvenç Yazıcıoğlu, Almıla; Kakaç, Sadık (null; 2011-07-22)
Performance Analysis of a Fractional Controller Developed for the Vibration Suppression of a Smart Beam
Onat, Cem; Şahin, Melin; Yaman, Yavuz (null; 2011-07-06)
Performance analysis of minimum mean square error type synchronizers for partial response signalling systems
Karşı, Fatih Murat; Tanık, Yalçın; Department of Electrical and Electronics Engineering (1989)
Performance analysis and comparison of reduced common mode voltage PWM and standard PWM techniques for three-phase voltage source inverters
Un, E; Hava, Ahmet Masum (2006-03-23)
This paper investigates the performance characteristics of the reduced common mode voltage (RCMV) PWM methods for three phase voltage source inverters and provides a comparison with the standard PWM methods. PWM methods are reviewed and their pulse patterns and common mode voltage patterns illustrated. The AC output current ripple, DC link input current ripple, and output voltage linearity characteristics of each modulation method are thoroughly investigated by analytical methods and simulations. The analys...
Citation Formats
B. Dağ, “Performance calculation of single phase permanent magnet synchronous motors for design optimization.,” Middle East Technical University, 2002.