Performance analysis and comparison of reduced common mode voltage PWM and standard PWM techniques for three-phase voltage source inverters

2006-03-23
This paper investigates the performance characteristics of the reduced common mode voltage (RCMV) PWM methods for three phase voltage source inverters and provides a comparison with the standard PWM methods. PWM methods are reviewed and their pulse patterns and common mode voltage patterns illustrated. The AC output current ripple, DC link input current ripple, and output voltage linearity characteristics of each modulation method are thoroughly investigated by analytical methods and simulations. The analysis leads to important results regarding the practical use of the investigated PWM methods. The paper aids in selection of appropriate PWM methods in drives that have low common mode voltage requirements.

Suggestions

Performance Analysis of Reduced Common-Mode Voltage PWM Methods and Comparison With Standard PWM Methods for Three-Phase Voltage-Source Inverters
Hava, Ahmet Masum (2009-01-01)
This paper surveys the reduced common-mode voltage pulsewidth modulation (RCMV-PWM) methods for three-phase voltage-source inverters, investigates their performance characteristics, and provides a comparison with the standard PWM methods. PWM methods are reviewed, and their pulse patterns and common-mode voltage (CMV) patterns are illustrated. The inverter input and output current ripple characteristics and output voltage linearity characteristics of each PWM method are thoroughly investigated by analytical...
Adaptive control of DC link current in current source converter based STATCOM for improving its power losses
Karaduman, Ferdi; Ermiş, Muammer; Bilgin, Hazım Faruk; Department of Electrical and Electronics Engineering (2012)
In conventional three-phase PWM (Pulse Width Modulation) current source converter based STATCOM (Static Synchronous Compensator) applications, DC link current is kept constant at a predefined value and the reactive power of STATCOM is controlled by varying modulation index. This control strategy causes unnecessary power losses especially when the reactive power of STATCOM is low. For this purpose, in order to reduce the active power drawn by STATCOM, the modulation index can be maximized by adjusting DC lin...
A High Performance PWM Algorithm for Common Mode Voltage Reduction in Three-phase Voltage Source Inverters
Uen, Emre; Hava, Ahmet Masum (2008-06-19)
A high performance PWM algorithm with reduced common mode voltage (CMV) and satisfactory overall performance is proposed for three-phase PWM inverter drives. The algorithm combines the near state PWM (NSPWM) method which has superior overall performance characteristics at high modulation index and MAZSPWM, a modified form of the active zero state PWM method (AZSPWM1), which is suitable for low modulation index range of operation. Since AZSPWM1 has line-to-line voltage pulse reversals with small zero-voltage...
Performance Evaluation and Selection of PWM Switching and Control Methods for Grid Connected Modular Multilevel Converters
Ciftci, Baris; Hava, Ahmet Masum (2015-09-24)
This paper focuses on the determination of suitable carrier based pulse width modulation (PWM) switching and control methods for grid connected modular multilevel converters (MMCs). Characterization of various level-shifted and phase-shifted carrier based PWM methods are provided in terms of output voltage waveforms both for N+1 and 2N+1 level output phase voltages. Carrier based PWM method based control approaches are evaluated for MMC. Performances of different control methods are evaluated and compared f...
Performance Analysis, Filter Component Sizing, and Controller Structure Selection of Small Capacitor Diode Rectifier Front End Inverter Drives
Aban, V. Volkan; Hava, Ahmet Masum (2014-09-24)
In this study, the input filter design and dc-bus voltage control of ac motor drives utilizing low capacitance film capacitor are investigated. The dc-bus voltage instability problem arising due to the resonance between the dc-bus capacitor and circuit inductances is explained. A dimensioning algorithm of dc-bus filter components for stable operation is given. The simulation results of the low capacitance motor drives with and without dc-link inductor are provided to observe the stability of the dc-bus at d...
Citation Formats
E. Un and A. M. Hava, “Performance analysis and comparison of reduced common mode voltage PWM and standard PWM techniques for three-phase voltage source inverters,” 2006, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54013.