Defect assessment of spot welds by NDI

Download
2003
Koçak, Okan Okay

Suggestions

Sensitivity computations in networks
Ceyhun, Yurdakul; Tokad, Y.; Department of Electrical and Electronics Engineering (1971)
Solvability and terminal solvability of arbitrary interconnected RLC networks that contain multiterminal ideal transformers and ideal gyrators.
Abdullah, Khaldun; Tokad, Yılmaz; Department of Electrical and Electronics Engineering (1971)
Rubber toughening of phenolic resin by using nitrile rubber and amino silane
Çağatay, Onur; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (2005)
The aim of this study was to investigate rubber toughening of resol type phenol-formaldehyde resin. For this purpose, phenolic resin was first modified by only acrylonitrile butadiene rubber, and then by using nitrile rubber together with 3-aminopropyltriethoxysilane. Test specimens were prepared by mixing and casting of liquid phenolic resin in three groups. In the first one, neat phenolic resin specimens were produced. In the second group, phenolic resin was modified with 0.5, 1, 2, and 3 wt.% nitrile rub...
Steady state characteristics of polarised-mho and directional relays with application to series compensated lines.
Abusharkh, M. Fawzi; Türeli, Ayhan; Department of Electrical and Electronics Engineering (1979)
Robustness Comparison of Moving Convolutive Source Separation Techniques
Kornycky, Josef; Günel Kılıç, Banu; Kondoz, Ahmet (2009-01-01)
A multitude of convolutive blind source separation algorithms exist, a small number of which can deal with moving sources. The main assumption for moving source algorithms is that for a small amount of time the sources are approximately stationary and hence the mixing conditions are slowly varying. In reality, speech sources are likely to fall silent and hence the mixing conditions will jump to new values. This paper compares a number of blind source separation algorithms focusing on robustness to source an...
Citation Formats
O. O. Koçak, “Defect assessment of spot welds by NDI,” M.S. - Master of Science, Middle East Technical University, 2003.