In-Situ production of TİC particulate reinforced AI metal matrix composite

Download
068495.pdf
1997
Sezenöz, Tufan
Show full item record
114
views
0
downloads
https://hdl.handle.net/11511/1538
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

In-situ synthesis of silver nanoparticles on porous silicon nanostructure through galvanic displacement reaction and its application in construction of glucose screen printed sensor
Allahnouri, Farzad; Farhadi, Khalil; Eskandari, Habibollah; Molaei, Rahim; Abarghoui, Mehdi Mokhtari; Forough, Mehrdad (2018-10-01)
In this work, a new nanocomposite as silver nanoparticles (AgNPs)@ porous silicon (PSi) was synthesised through a simple galvanic displacement reaction between silver ions and silicon in the presence of hydrofluoric acid. The as-prepared nanocomposites were characterised via field emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy and electrochemical methods. Since the nanocomposite showed ...
In-situ generation of poly(n-vinyl-2-pyrrolidone)-stabilized palladium(0) and ruthenium(0) nanoclusters as catalysts for hydrogen generation from the methanolysis of ammonia-borane
Erdoğan, Huriye; Özkar, Saim; Department of Chemistry (2010)
More attention has been paid to find new type renewable energy sources because of increasing concern about the environmental problems arising from the combustion of fossil fuels as energy sources. The development of new storage materials will facilitate the use of hydrogen as a major energy carrier. Several possibilities exist for ‘‘solid-state’’ storage: the hydrogen can be trapped in metal organic frameworks, carbon nanotubes and certain alloys; or one can use materials in which hydrogen is already presen...
In-situ combustion laboratory studies of Turkish heavy oil reservoirs
Bagci, Suat; Kök, Mustafa Verşan (Elsevier BV, 2001-12)
The purpose of this research was to perform dry and wet forward combustion experiments for Turkish heavy oil reservoirs (Raman, Adiyaman and Çamurlu and Bati Kozluca) under different experimental conditions. In the experiments, a vertical tube was packed with crushed limestone and saturated with crude oil and water. It was observed that peak temperatures were higher when stabilized combustion was achieved and decreased as the combustion front approached the outlet end of the tube. In wet combustion experime...
In-flight calibration of pico satellite attitude sensors via unscented kalman filter
Söken, Halil Ersin (Pleiades Publishing Ltd, 2011-07-01)
In this paper an Unscented Kalman filter based procedure is proposed for the bias estimation of attitude sensors of a pico satellite. Three axis magnetometers and the rate gyros are used as attitude sensors. At the initial phase, biases of three orthogonally located magnetometers are estimated as well as the attitude and attitude rates of the satellite. During initial period after the orbit injection, gyro measurements are accepted as bias free, since the precise gyros are working accurately and the accumul...
In-Strip Matching and Reconstruction of Line Segments from UHR Aerial Image Triplets
Ok, Ali Ozgun; Wegner, Jan Dirk; Heipke, Christian; Rottensteiner, Franz; Soergel, Uwe; Toprak, Vedat (2011-10-07)
In this study, we propose a new line matching and reconstruction methodology for aerial image triplets that are acquired within a single strip. The newly developed stereo reconstruction approach gives us better line predictions in the third image which in turn helps to improve the performance of the matching. The redundancy information generated in each stereo match gives us ability to reduce the number of false matches while preserving high levels of matching completeness. The approach is tested over four ...
Citation Formats
T. Sezenöz, “In-Situ production of TİC particulate reinforced AI metal matrix composite,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr