Hydraulic and numerical modelling of water circulation in Datça marina caused by a pumped discharge and a wave pump

Download

090699.pdf

Date

1999

Author

Öztürk, Cumhur

Metadata

Show full item record

Item Usage Stats

69
views

0
downloads

URI

https://hdl.handle.net/11511/2767

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Hydraulic and static investigations about dams with crest and bottom gates. Kapancıoğlu, Mustafa; Department of Civil Engineering (1963)
Hydraulic and econimic evaluation of Uluirmak irrigation project. Cetinkaya, Hikmet; Department of Civil Engineering (1973)
Hydraulic characteristics of sharp-crested weirs with application to labyrinth spillways Kumcu, Ş. Yurdagül; Göğüş, Mustafa; Department of Civil Engineering (1997)
Hydraulic characteristics of flow measurement flumes of rectangular compound cross section Al-Khatib, Issam Ahmad; Göğüş, Mustafa; Department of Civil Engineering (1989)
Hydraulic adjustments of the Bosphorus exchange flow Oguz, T (American Geophysical Union (AGU), 2005-03-19) A three dimensional model elucidates connection between observed internal hydraulic characteristics of the Bosphorus flow and channel configuration. A typical two-layer, quasi-steady exchange flow system is shown to be hydraulically adjusted within the strait by a series of morphological features. Three successive hydraulic controls occur within the southern 10 km zone: first near the southern exit due to convex bending of the channel, then at the southern sill and at the constriction. Finally, the exchange...

Citation Formats

C. Öztürk, “Hydraulic and numerical modelling of water circulation in Datça marina caused by a pumped discharge and a wave pump,” Middle East Technical University, 1999.