Feyza Kazanç Özerinç

E-mail
fkazanc@metu.edu.tr
Department
Department of Mechanical Engineering
Scopus Author ID
Web of Science Researcher ID
Evaluating BECCS–Biochar systems as hybrid negative emission technologies through life cycle assessment
Kır, Ali Bertan; Kazanç Özerinç, Feyza; Kurt, Zöhre (2026-11-15)
Integrating biochar production (BC) with carbon capture and storage (CCS) offers a hybrid negative-emission pathway that may improve carbon removal relative to standalone biochar systems while preserving the long-term perm...
Thermochemical Characterization and Environmental Ash of COVID-19-Related Medical Waste Disposal
Güçlü, Umut; Pisano, Italo; Trubetskaya, Anna; Hijazi, Ayman; Leahy, James J.; Kazanç Özerinç, Feyza (2026-04-21)
The extensive use of single-use personal protective equipment (PPE) during the COVID-19 pandemic has substantially increased the generation of plastic-rich medical waste, raising concerns regarding its safe thermal treatme...
Thermochemical processing of organic wastes for sustainable valorisation and energy recovery: A review of recent contributions to the field
Gömeç, Çiğdem; Dalkılıç, Kenan; PERENDECİ, NURİYE ALTINAY; Güngörmüşler, Mine; Somorin, Tosin; Roussel, Jimmy; VAROL, MURAT; Ramos, Ana; van Hullebusch, Eric D.; Trubetskaya, Anna; Kazanç Özerinç, Feyza; Vasić, Milica; Akan, Aytac Perihan; Ugurlu, Aysenur; Marchetti, Jorge; Balasundararajan, Viveka; Kikas, Timo (2025-10-01)
This paper reviews the current knowledge on the thermochemical processing of organic waste for sustainable valorisation and presents its impacts on energy recovery. We focused on novel, low-cost, and highly efficient therm...
Impact of nitrogen and alkali dopants on pore architecture and surface functionalities of biochar in one-step CO2 pyrolysis
Akın, Süleyman Şener; Kır, Ali Bertan; Kazanç Özerinç, Feyza (2025-03-01)
This study aims to elucidate the roles of common nitrogen dopants (melamine (M) and ammonium chloride (ACL)) and alkali agents (KOH (K) and NaOH (N)) on surface functional groups, pore architectures, and degrees of graphit...
Biochar gasification: Insights from pyrolysis atmospheres and gasification heating rates
Akgül, Alican; Akın, Süleyman Şener; Güleç, Fatih; Kazanç Özerinç, Feyza (2024-03-15)
Gasification is a promising technology for the synthesis of syngas and hydrogen, with char reactivity being a pivotal factor in the design of industrial gasifiers. Despite extensive studies on the gasification characterist...
Sodium salt surface interactions affect single particle combustion behavior of biomass, coal, and their chars
Akın, Süleyman Şener; Akgül, Alican; Kazanç Özerinç, Feyza (2023-12-15)
Sodium salt additions provide an effective route for tuning the combustion behavior of solid fuels. The salt-fuel surface interactions play a key role in combustion, as demonstrated by low heating rate experiments. High he...
Characterization of tars from recycling of PHA bioplastic and synthetic plastics using fast pyrolysis
Akgül, Alican; Palmeiro-Sanchez, Tania; Lange, Heiko; Magalhaes, Duarte; Moore, Sean; Paiva, Alexandre; Kazanç Özerinç, Feyza; Trubetskaya, Anna (2022-10-05)
© 2022 The AuthorsThe aim of this study was to investigate the pyrolysis products of polyhydroxyalkanoates (PHAs), polyethylene terephthalate (PET), carbon fiber reinforced composite (CFRC), and block co-polymers (PS-b-P2V...
Influence of biomass thermal pre-treatment on the particulate matter formation during pulverized co-combustion with lignite coal
Magalhaes, Duarte; Kazanç Özerinç, Feyza (2022-01-15)
This work investigated the particulate matter formation during co-combustion of thermally pre-treated biomass with coal. Olive residue was chosen as agricultural waste biomass, and Tunçbilek lignite as the coal. The biomas...
The effect of torrefaction, slow, and fast pyrolysis on the single particle combustion of agricultural biomass and lignite coal at high heating rates
Magalhães, Duarte; Gürel, Kaan; Kazanç Özerinç, Feyza (2022-01-15)
The present paper studies single particle combustion of olive residue (OR), almond shell (AS), and Tunçbilek lignite (TL) and their thermal pre-treated particles in a vertical wire mesh reactor (WMR) setup. Pre-treatment o...
ABS-Fly Ash Composite Filaments for Fused Deposition Modeling
Alduais, Abdullah; Kazanç Özerinç, Feyza; Bayram, Göknur; Özerinç, Sezer (2022-01-01)
© 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Fused deposition modeling (FDM) is one of the most widely used additive manufacturing techniques for the fabrication of polymeric parts. E...
Citation Formats