Harris condition and recurrent potential.

1973
Üstünel, Süleyman
Show full item record
72
views
0
downloads
https://hdl.handle.net/11511/3065
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Marching distance functions for smooth control of hyperbolic grids
Durmus, G; Kavsaoglu, MS (2000-10-01)
The smooth control of hyperbolic grids is achieved by using marching distance functions. The marching distance can be expressed as a function of grid control. The derivative expressions of the linearized hyperbolic equations are approximated by second order central differences.
Multi-source Partial Discharge Signals Discrimination by Six Bandpass filters and DBSCAN Clustering
Anşin, Berfin (2018-01-01)
Partial discharge (PD) signals generated by defects in a transformer insulation can be captured through measurement instruments and they may be used, after preprocessing, to discriminate the PD Sources. Some of the artificial defect models, such as: corona, internal cavity and surface discharge in air are developed in the laboratory. These defect models are put in parallel under a high voltage stress. The PD signals stemmed from these sets of multiple PD sources are captured. In this paper six bandpass filt...
Period-doubling route to chaos in shunting inhibitory cellular neural networks
Akhmet, Marat; FEN, MEHMET ONUR (2013-01-01)
In this study, we investigate the dynamics of shunting inhibitory cellular neural networks with external inputs in the form of relay functions. The presence of chaos through period-doubling cascade is proved theoretically. An example that confirms the theoretical results is illustrated. © 2013 IEEE.
Cyclic behavior of unidirectional and cross-ply titanium matrix composites
Neu, R.W.; Çöker, Demirkan; Nicholas, T. (1996-01-01)
Relatively simple and efficient micromechanical models are used to obtain the uniaxial response of SCS-6/Timetal 21S with [0](4) and [0/90](s) laminates when subjected to isothermal and thermomechanical fatigue (TMF) loadings. Features of the modeling that are required to obtain the accurate deformation behavior for this class of materials under these loadings are highlighted. To this end, a comparison is made between the concentric cylinder model and the uniaxial stress model for representing the [0] lamin...
Multi-level MRP lot-sizing heuristics.
Meral, F Sedef; Department of Industrial Engineering (1985)
Citation Formats
S. Üstünel, “Harris condition and recurrent potential.,” Middle East Technical University, 1973.
METU IIS - Integrated Information Service open@metu.edu.tr