Synthesis and characterization of a new copolymer of PTSA doped polypyrrole

2003-04-04
In this work poly(2-methylbutyl 2-(3-thienyl)acetate was prepared by galvanostatic polymerization of (S)-2-methylbutyl 2-(3-thienyl) acetate. Polypyrrole was electrochemically polymerized on a poly(2-methylbutyl 2-(3-thienyl)-acetate) coated anode through the thiophene moities of the matrix polymer. Direct insertion probe pyrolysis MS and Curie point pyrolysis GCMS techniques were utilized for structural and thermal characterizations.
Synthetic Metals

Suggestions

Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties
AK, M; Çırpan, Ali; Yılmaz, Fatih; YAGCI, Y; Toppare, Levent Kamil (2005-05-01)
A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectro-chemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and similar to 1000 nm, revealing pi to pi* transition, polaron and b...
Synthesis and characterization of conducting copolymers of poly(vinyl alcohol) with thiophene side-groups and pyrrole
Sahmetlioglu, E; Yuruk, H; Toppare, Levent Kamil; Cianga, I; Yagci, Y (2004-12-01)
Graft copolymers of poly(vinyl alcohol) with thiophene side-groups and pyrrole were synthesized by electrochemical polymerization methods. Poly(vinyl alcohol) with thiophene side-groups (PVATh) was obtained from the reaction between poly(vinyl alcohol) (PVA) and thiophene-3-acetic acid. The syntheses of copolymers Of PVATh and pyrrole were achieved electrochemically by using three different supporting electrolytes, p-toluene sulfonic acid (PTSA), sodium dodecyl sulfate (SDS) and tetrabutylammonium tetrafluo...
Characterization of conducting copolymer of pyrrole via pyrolysis mass spectrometry
Levent, Anil; Hacaloğlu, Jale; Toppare, Levent Kamil (2008-03-01)
In this work, structural and thermal characterization of BF4- doped copolymer of pyrrole (PPy) with 2-methylbutyl-2-(3-thienyl)acetate prepared by electrochemical polymerization were performed via a pyrolysis mass spectrometry technique. The pyrolysis mass spectrometry data of the copolymer PPy/PMBTA, and the homopolymers; polypyrrole, PPy, and poly(2-methylbutyl-2-(3-thienyl)acetate), PMBTA were analyzed and compared. It has been determined that when the electrochemical polymerization of pyrrole was achiev...
Characterization of the polymer of a dipyrrolyl monomer by pyrolysis mass spectrometry
Ertas, Merve; Hacaloğlu, Jale; Toppare, Levent Kamil (2004-08-01)
In this work, characterization of a homopolymer of succinic acid bis(4-pyrrol-1-ylphenyl) ester prepared by galvonastatic polymerization was carried out by direct pyrolysis mass spectrometry. Although decomposition of the monomer yielding mainly butadionic acid and pyrrole occurred under the galvonastatic polymerization conditions, growth of the polymer through the pyrrole moieties was also achieved, yielding a ladder-type polymer film. The polypyrrole chains contained both quinoid and aromatic units as in ...
Characterization of conducting copolymer of thiophene via pyrolysis mass spectrometry
Levent, Anil; Hacaloğlu, Jale; Toppare, Levent Kamil (2005-12-01)
In this work, structural and thermal characterization of a conducting copolymer of thiophene (PTh) with 2-methylbutyl-2-(3-thienyl)acetate prepared by two different methods has been performed by pyrolysis mass spectrometry techniques. The pyrolysis mass spectrometry data of both components of the copolymer, polythiophene, PTh, poly(2-methylbutyl-2-(3-thienyl)acetate), PMBTA and PTh/PMBTA have been analyzed and compared. It has been determined that when the electrochemical polymerization of thiophene was ach...
Citation Formats
A. Levent, J. Hacaloğlu, L. K. Toppare, and Y. Yagci, “Synthesis and characterization of a new copolymer of PTSA doped polypyrrole,” Synthetic Metals, pp. 457–458, 2003, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/30807.