Motion control of flexible-link manipulators

2008-12-01
KILIÇASLAN, SEMA
Ider, S. K.
Özgören, Mustafa Kemal
A new method is proposed for the end-effector trajectory tracking control of flexible robot manipulators. The equations of motion are separated into two parts that represent the pseudostatic equilibrium and the deviations from it, The part of the control input for the pseudostatic equilibrium is determined algebraically, and the other part of the control input for the stabilization of the deviations is obtained by a state variable feedback law, by using strain, joint variable, and end-effector position measurements. The feedback gain matrix is determined online by continuously updated pole placement, The pseudostatic equilibrium is defined here as a hypothetical state, in which the velocity and acceleration of the end-effector have their desired values whereas the elastic deformations are instantaneously constant. In order to demonstrate the method, a planar two-link robot with a flexible forearm is taken into consideration. The elasticity of the forearm is approximately described by the first two modes, and a controller is designed by using this two-mode model. Furthermore, in order to investigate the effects of modelling discrepancies, a 'submodel controller' is designed by using a model with only the first mode and it is applied to the same system with the two-mode model. The performances of these two controllers are compared by means of simulations. The behaviour of the flexible robot is also simulated by using the computed torque method as if the robot is rigid in order to illustrate the importance of including the flexibility effects in the formation of an appropriate control law. The spillover effect that causes the dominant poles to approach towards the imaginary axis is inspected by monitoring the real parts of the dominant poles of the closed-loop system under the effect of the 'submodel' and 'computed torque' controllers.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Suggestions

Hybrid force and motion control of robots with flexible links
KILIÇASLAN, SİNAN; Özgören, Mustafa Kemal; Ider, S. Kemal (2010-01-01)
Considering robot manipulators with flexible links, a new method is proposed to control their constrained end-effector motions and the associated contact forces and/or moments. The equations of motion are separated into two parts that represent the pseudostatic equilibrium and the deviations from it. The feedforward part of the control input based on the pseudostatic equilibrium is determined algebraically and the feedback part of the control input for the stabilization of the deviations is obtained by mean...
Motion Control of a Spatial Elastic Manipulator in the Presence of Measurement Noises
Kilicaslan, Sinan; İder, Sıtkı Kemal; Özgören, Mustafa Kemal (2021-07-01)
This paper presents a method for the end effector motion control of a spatial three-link robot having elastic second and third links including measurement noises. In the derivation of equations of motion, not to face with complex equations of motion, each link is modeled as though the links are not connected and the restrictions on the links due to connecting them by joints are written as constraint equations. After that the Lagrange multipliers are eliminated and the constraint equations at the acceleratio...
Hybrid Force and Motion Control of a Three-Dimensional Flexible Robot Considering Measurement Noises
Kılıçaslan, Sinan; Özgören, Mustafa Kemal; Ider, Sıtkı Kemal (2022-07-01)
This work addresses the end-effector trajectory-tracking force and motion control of a three-dimensional three-link robot considering measurement noises. The last two links of the manipulator are considered as structurally flexible. An absolute coordinate approach is used while obtaining the dynamic equations to avoid complex dynamic equations. In this approach, each link is modeled as if there is no connection between the links. Then, joint connections are expressed as constraint equations. After that, the...
Trajectory tracking control of robots with flexible links
Ider, SK; Özgören, Mustafa Kemal; Ay, V (2002-11-01)
A new method is developed for the end-effector trajectory tracking control of robots with flexible links. In order to cope with the non-minimum phase property of the system, the closed-loop poles are placed at desired locations using full state feedback. The dynamic equations are linearized about the rigid motion. A composite control law is designed to track the desired trajectory while at the same time the internal dynamics is stabilized. The proposed method is valid for all types of manipulators with any ...
Locomotion Gait Optimization For Modular Robots; Coevolving Morphology and Control
Pouya, Soha; Aydın Göl, Ebru; Moeckel, Rico; Ijspeert, Auke Jan (2011-01-01)
This study aims at providing a control-learning framework capable of generating optimal locomotion patterns for the modular robots. The key ideas are firstly to provide a generic control structure that can be well-adapted for the different morphologies and secondly to exploit and coevolve both morphology and control aspects. A generic framework combining robot morphology, control and environment and on the top of them optimization and evolutionary algorithms are presented. The details of the components and ...
Citation Formats
S. KILIÇASLAN, S. K. Ider, and M. K. Özgören, “Motion control of flexible-link manipulators,” PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, pp. 2441–2453, 2008, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/31765.