Penetration rate prediction for diamond bit drilling by adaptive neuro-fuzzy inference system and multiple regressions

Date

2014-05-01

Author

BASARIR, HAKAN
Tutluoğlu, Levend
Karpuz, Celal

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

226
views

0
downloads

In many mining, civil, and petroleum engineering applications diamond bit drilling is widely used due to high penetration rate, core recovery and its ability to drill with less deviation. Recently, many research have been conducted to estimate the penetration rate of diamond drilling which can be considered as one of the most important parameters in project planning and cost estimation of the operation.

Subject Keywords

Geotechnical Engineering and Engineering Geology, Geology

URI

https://hdl.handle.net/11511/35586

Journal

ENGINEERING GEOLOGY

DOI

https://doi.org/10.1016/j.enggeo.2014.02.006

Collections

Department of Mining Engineering, Article

Suggestions

OpenMETU
Core

Performance assessment of cement grout borehole plugs in basalt Akgün, Haluk (Elsevier BV, 1994-01-01) Flow tests have been conducted on expansive cement grout plugs with diameters of 160 mm and 200 mm, and length-to-diameter ratios of one, in boreholes in basalt blocks and in steel pipes. Two types of flow tests have been performed: pseudo-constant head tests and transient pulse tests. Hydration temperatures of cement grout plugs have been monitored in steel pipes with inside diameters ranging from 110 mm to 200 mm. During flow tests, basalt blocks have fractured, presumably due to water injection pressure,...
Numerical modelling of out-of-seam dilution in longwall retreat mining SAEEDI, G.; SHAHRIAR, K.; REZAI, B.; Karpuz, Celal (Elsevier BV, 2010-06-01) Longwall mining is a common mining method in Iran that is often affected by out-of-seam dilution (OSD). The field investigations performed in Tabas coal mine show that OSD often occurs due to roof falls in front of the face area before support setting and also removing some floor material. The increase in unsupported roof span above the shearer may cause difficulty in controlling the roof and consequently increases dilution of the run of mine (ROM) coal. The paper presents the results of a study on some dom...
Residual Shear Strength Measured by Laboratory Tests and Mobilized in Landslides Mesri, Gholamreza; Huvaj Sarıhan, Nejan (American Society of Civil Engineers (ASCE), 2012-05-01) Drained residual shear strength measured by multiple reversal direct shear or ring shear tests has been successfully used for over four decades for stability analyses of reactivated landslides in stiff clays and clay shales; A body of literature has accumulated in recent decades, claiming that "healing" or "strength regain" is realized in time on preexisting slip surfaces already at residual condition. In other words, the shear stress required to reactivate a landslide is claimed to be larger than the drain...
Performance analysis of drilling fluid liquid lubricants Sonmez, Ahmet; Kök, Mustafa Verşan; Ozel, Reha (Elsevier BV, 2013-08-01) Excessive torque is one of the most important problems in oil/gas drilling industry. Friction between wellbore/casing and drill string causes excessive torque. This study discusses performance analysis of drilling fluid lubricants, which are used as friction reducers in well-bores. Three different types of chemical commercial lubricants, which are fatty acid and glyceride based, triglyceride and vegetable oil based and polypropylene glycol based, diesel oil, and crude oil, which consists of different API gr...
Deformation Limits for Structural Walls with Confined Boundaries Kazaz, Ilker; Gulkan, Polat; Yakut, Ahmet (SAGE Publications, 2012-08-01) For accurate analytical assessment of performance and damage in reinforced concrete members, well-defined deformation limits at particular damage states are required. With advanced and computationally intensive finite element analyses, we establish deformation limits at yield and ultimate limit states for adequately confined rectangular reinforced concrete structural walls in terms of drift ratio, plastic rotation, and curvature. To investigate the deformation limits of structural walls, a parametric study ...

Citation Formats

H. BASARIR, L. Tutluoğlu, and C. Karpuz, “Penetration rate prediction for diamond bit drilling by adaptive neuro-fuzzy inference system and multiple regressions,” ENGINEERING GEOLOGY, pp. 1–9, 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35586.