A Generalized Scalar PWM Approach With Easy Implementation Features for Three-Phase, Three-Wire Voltage-Source Inverters

Date

2011-05-01

Author

Hava, Ahmet Masum

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

209
views

0
downloads

The generalized scalar pulse width modulation (PWM) approach, which unites the conventional PWM methods and most recently developed reduced common mode voltage PWM methods under one umbrella, is established. Through a detailed example, the procedure to generate the pulse patterns of these PWM methods via the generalized scalar PWM approach is illustrated. With this approach, it becomes an easy task to program the pulse patterns of various high performance PWM methods and benefit from their performance in modern three-phase, three-wire voltage-source inverters for applications such as motor drives, PWM rectifiers, and active filters. The theory is verified by laboratory experiments. Easy and successful implementation of various high-performance PWM methods is illustrated for a motor drive.

Subject Keywords

Electrical and Electronic Engineering

URI

https://hdl.handle.net/11511/40954

Journal

IEEE TRANSACTIONS ON POWER ELECTRONICS

DOI

https://doi.org/10.1109/tpel.2010.2081689

Collections

Department of Electrical and Electronics Engineering, Article

Suggestions

OpenMETU
Core

Performance Enhancement of the Single-Phase Series Active Filter by Employing the Load Voltage Waveform Reconstruction and Line Current Sampling Delay Reduction Methods Senturk, Osman S.; Hava, Ahmet Masum (Institute of Electrical and Electronics Engineers (IEEE), 2011-08-01) This paper proposes the waveform reconstruction method (WRM), which is utilized in the single-phase series active filter's (SAF's) control algorithm, in order to extract the load harmonic voltage component of voltage harmonic type single-phase diode rectifier loads. Employing WRM and the line current sampling delay reduction method, a single-phase SAF compensated system provides higher harmonic isolation performance and higher stability margins compared to the system using conventional synchronous-reference...
A New Approach to Investigation of the Relationship of VLF Signals by Using Longitudinal Analysis Models Guzel, E.; Yaşar, M.; Kılıç, M. B.; Canyılmaz, M. (Hindawi Limited, 2013) Longitudinal analysis models are applied to analyze very low frequency (VLF) electromagnetic waves signals. They are useful in realization of nuance of relationship between parameters of concern which change over time. VLF data are so important for the communication and determining the disturbances in the lower ionosphere. In this study, we used a four-day VLF signal data which come from transmitter stations located at two different countries to Elazi. g receiver system. A very important feature of this dat...
A current source converter based statcom for reactive power compensation at low voltage Biçer, Nazan; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2010) This research work is devoted to the analysis, design and development of the Current-Source Converter (CSC) based distribution-type Static Synchronous Compensator (D-STATCOM) for low-voltage applications in reactive-power control in order to achieve i) faster transient response in reactive-power control, ii) lower current harmonic distortion, iii) lower power losses and iv) minimum storage elements in comparison with conventional solutions. The developed CSC-D-STATCOM includes a low-pass input filter and a ...
Triple stub circuit topology as simultaneous insertion phase, amplitude and impedance control circuit for phased array applications Unlu, M.; Demir, Şimşek; Akın, Tayfun (Institution of Engineering and Technology (IET), 2012-10-23) This study shows that the well-known triple stub circuit topology can also be used for controlling the insertion phase and amplitude of a given signal simultaneously, as well as preserving its impedance transformation ability. The triple stub circuit topology, which is nothing but an extension of the conventional double stub loaded-line phase shifter, results in one more degree of freedom to its solution when it is solved for its insertion phase. This additional degree of freedom not only brings the impedan...
Active clamped ZVS forward converter with soft-switched synchronous rectifier for high efficiency, low output voltage applications Acik, A; Cadirci, I (Institution of Engineering and Technology (IET), 2003-03-01) The analysis, design, and implementation of an active clamped ZVS forward converter equipped with a soft-switched synchronous rectifier (ACFC-SR), proposed for high-efficiency low output voltage DC-DC converter applications, is presented. The converter efficiency is maximised due to soft switching of the main, active clamp, synchronous rectifier, and freewheeling MOSFET switches. The operating principles of the ACFC-SR are analysed in detail, and the converter performance is compared with that of alternativ...

Citation Formats

A. M. Hava, “A Generalized Scalar PWM Approach With Easy Implementation Features for Three-Phase, Three-Wire Voltage-Source Inverters,” IEEE TRANSACTIONS ON POWER ELECTRONICS, pp. 1385–1395, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/40954.