Relation of structure to performance characteristics of monolithic and perfusive stationary phases

Date

2009-09-04

Author

Trilisky, Egor I.
Koku, Harun
Czymmek, Kirk J.
Lenhoff, Abraham M.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

171
views

0
downloads

Commercially available polymer-based monolithic and perfusive stationary phases were evaluated for their applicability in chromatography of biologics. Information on bed geometry, including that from electron microscopy (EM), was used to interpret and predict accessible volumes, binding capacities, and pressure drops. For preparative purification of biologics up to at least 7 nm in diameter, monoliths and perfusive resins are inferior to conventional stationary phases due to their low binding capacities (20-30 g/L for BSA). For larger biologics, up to several hundred nanometers in diameter, calculations from EM images predict a potential increase in binding capacity to nearly 100 g/L. The accessible volume for adenovirtis calculated from the EM images matched the experimental value. While the pores of perfusive resins are essentially inaccessible to adenovirus under binding conditions, under non-adsorbing conditions the accessible intrabead porosity is almost as large as the interbead porosity. Modeling of breakthrough curves showed that the experimentally observed slow approach to full saturation can be explained by the distribution of pore sizes.

Subject Keywords

Organic Chemistry, Analytical Chemistry, Biochemistry, General Medicine

URI

https://hdl.handle.net/11511/40963

Journal

JOURNAL OF CHROMATOGRAPHY A

DOI

https://doi.org/10.1016/j.chroma.2009.07.005

Collections

Department of Chemical Engineering, Article

Suggestions

OpenMETU
Core

Modeling of dispersion in a polymeric chromatographic monolith Koku, Harun; Schure, Mark R.; Lenhoff, Abraham M. (Elsevier BV, 2012-05-11) Dispersion in a commercial polymeric monolith was simulated on a sample geometry obtained by direct imaging using high-resolution electron microscopy. A parallelized random walk algorithm, implemented using a velocity field obtained previously by the lattice-Boltzmann method, was used to model mass transfer. Both point particles and probes of finite size were studied. Dispersion simulations with point particles using periodic boundaries resulted in plate heights that varied almost linearly with flow rate, a...
Asymmetric synthesis of N-aryl substituted chiral 1,4-aminoalcohol derivatives and applications in various asymmetric transformation reactions Odabaş, Serhat; Tanyeli, Cihangir; Department of Chemistry (2007) The asymmetric synthesis of N-aryl substituted chiral 1,4-aminoalcohols and their applications in asymmetric borane reduction and enantioselective diethylzinc addition to benzaldehyde reactions were performed starting from meso-anhydride 51 that is the cycloadduct of cyclopentadiene and maleic anhydride. The desymmetrization of meso-anhydride 51 was achieved by using quinine or quinidine with very high enantiomeric excess value (up to 98% ee) and with high chemical yield. The quinine-mediated desymmetrizati...
Asymmetric synthesis of norbornene based 1,4-Aminoalcohol derivatives and applications in asymmetric diethylzinc reactions Erdem, Mine; Tanyeli, Cihangir; Department of Chemistry (2007) The asymmetric synthesis of chiral norbornene based 1,4-aminoalcohols and their applications in asymmetric diethylzinc addition reactions was perfomed starting from meso-anhydride 50. The desymmetrization of this meso-anhydride 50 was done by the usage of quinine or quinidine cinchona alkaloids with very high enantiomeric excess values (up to 98% ee) and chemical yields. The Quinidine-mediated desymmetrization of meso-anhydride 50 with methanol gave (2R,3S)-(+)-cis-monoester 51. The amination of this result...
Modeling of flow in a polymeric chromatographic monolith Koku, Harun; Czymmek, Kirk J.; Schure, Mark R.; Lenhoff, Abraham M. (Elsevier BV, 2011-06-03) The flow behavior of a commercial polymeric monolith was investigated by direct numerical simulations employing the lattice-Boltzmann (LB) methodology. An explicit structural representation of the monolith was obtained by serial sectioning of a portion of the monolith and imaging by scanning electron microscopy. After image processing, the three-dimensional structure of a sample block with dimensions of 17.8 mu m x 17.8 mu m x 14.1 mu m was obtained, with uniform 18.5 nm voxel size. Flow was simulated on th...
Synthesis of heterocyclic amine substituted novel 1,4-Aminoalcohols and applications in various asymmetric transformations Keskin, Eda; Tanyeli, Cihangir; Department of Chemistry (2007) Aminoalcohols are very important compounds used in various asymmetric transformations as chiral ligands or chiral auxiliaries. In this thesis, four novel heterocyclic amine substituted chiral 1,4-aminoalcohols were synthesized. In the synthetic strategy, amide esters were synthesized from (2S, 3R)-3-methoxycarbonylbicyclo[2.2.1]hept-5-ene-2-carboxylic acid by DCC coupling method. Subsequent reduction of these amide esters lead to target 1,4-aminoalcohols. The activities of these novel chiral 1,4-aminoalcoho...

Citation Formats

E. I. Trilisky, H. Koku, K. J. Czymmek, and A. M. Lenhoff, “Relation of structure to performance characteristics of monolithic and perfusive stationary phases,” JOURNAL OF CHROMATOGRAPHY A, pp. 6365–6376, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/40963.