Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin

Date

2015-01-01

Author

Tutluoğlu, Levend
Karpuz, Celal

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

187
views

0
downloads

Under compression, gathering data related to the post-failure part of the stress-strain curve requires stiff servo-controlled testing systems. In unconfined conditions, data related to the post-peak region of the intact rock parameters are not common as pre-peak and peak state parameters of stress-strain behavior. For problems involving rock in the failed state around structures, proper choice of plastic constitutive laws and post-failure parameters is important for the modeling of the failed state. The aim is to relate commonly used intact rock parameters of pre-failure (tangent modulus E (i) and secant modulus E (s)) and peak strength (sigma (ci)) states to parameters of the post-failure state under unconfined compression. Post-failure parameters are the drop modulus (D (pf)), representing the slope of the falling portion in brittle state, residual strength (sigma (cr)), and dilatancy angle (psi A degrees). Complete stress-strain curves were generated for various intact rock of different origin. Seventy-three post-failure tests were conducted. Samples included in the testing program were chosen to represent rocks of different origin. Specimens of granite, rhyodacite, dunite, quartzite series, glauberite, argillite, marl, and lignite were used in the tests. The results from the pre-failure and peak state testing parts were processed and compared to the post-failure stress-strain parameters. For the estimation of post-failure parameters in terms of the pre-peak and peak states, the functional relations were assessed. It was found that the drop modulus D (pf) increases with rock strength sigma (ci), following a power function with an approximate power of two. With an exponential trend, the D (pf)/E (s) ratio increases with decreasing E (i)/sigma (ci) ratio. Relations estimating the residual strength and dilatancy from the pre-peak and peak state parameters are in logarithmic and exponential functional forms, respectively.

Subject Keywords

Geotechnical Engineering and Engineering Geology, General Engineering, Earth and Planetary Sciences (miscellaneous), General Earth and Planetary Sciences, Geology, Civil and Structural Engineering, General Environmental Science

URI

https://hdl.handle.net/11511/42940

Journal

ROCK MECHANICS AND ROCK ENGINEERING

DOI

https://doi.org/10.1007/s00603-014-0549-1

Collections

Department of Mining Engineering, Article

Suggestions

OpenMETU
Core

Comparison of 2D versus 3D modeling approaches for the analysis of the concrete faced rock-fill Cokal Dam Arıcı, Yalın (Wiley, 2013-12-01) This paper's primary purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a concrete faced rock-fill dams under dynamic loading conditions. The state of stress on the face plate was obtained in both cases using a total strain based crack model to predict the spreading of cracks on the plate and the corresponding crack widths. Results of the 2D and 3D analyses agree well. Although significantly more demanding, 3D analyses have the advantage of predicting the followin...
Influence of long-period filter cut-off on elastic spectral displacements Akkar, Dede Sinan; Bommer, Julian J. (Wiley, 2006-07-25) The effect of the long-period filter cut-off, T-c, on elastic spectral displacements is investigated using a strong ground-motion database from Europe and the Middle East. The relation between the filter and oscillator responses is considered to observe the influence of T-c for both analogue and digital records, and the variations with site classification, magnitude, filter order and viscous damping. Robust statistics are derived using the re-processed European data to generalize the effects of the long-per...
Evaluation of displacement coefficient method for seismically retrofitted buildings with various ductility capacities Dicleli, Murat (Wiley, 2014-07-25) This research study is aimed at evaluating the accuracy of the displacement coefficient method (DCM) of FEMA 440 and associated nonlinear static procedure (NLSP) for actual buildings with soft story mechanism and various ductility capacities. The DCM and associated NLSP are evaluated using two existing seismically vulnerable buildings with soft story mechanism. The buildings are first retrofitted using a ductile steel-brace-link system to represent those with good ductility capacity and then retrofitted wit...
A LINEAR MATHEMATICAL-MODEL FOR THE SEISMIC INPLANE BEHAVIOR OF BRICK MASONRY WALLS .2. DETERMINATION OF MODEL PARAMETERS THROUGH OPTIMIZATION USING EXPERIMENTAL-DATA Sucuoğlu, Haluk; McNiven, Hugh (Wiley, 1984-01-01) The parameters appearing in the mixture and effective modulus models proposed in Part 1 are determined through optimization by matching theoretical and experimental responses. The optimization analysis is performed in frequency space. The response quantities chosen to be matched are the complex frequency response functions (experimental and theoretical) relating the Fourier transforms of top and base accelerations of the wall. Computations in optimization analysis are carried out by introducing an object (e...
Effect of near-fault ground motion and damper characteristics on the seismic performance of chevron braced steel frames Dicleli, Murat (Wiley, 2007-06-01) This study is aimed at comparing the seismic performance of steel chevron braced frames (CBFs) with and without fluid viscous dampers (FVDs) as a function of the characteristics of the near-fault (NF) ground motion and FVD parameters. For this purpose, comparative nonlinear time history (NLTH) analyses of single and multiple storey CBFs with and without FVDs are conducted using NF ground motions with various velocity pulse periods scaled to have small, moderate and large intensities. Additionally, NLTH anal...

Citation Formats

L. Tutluoğlu and C. Karpuz, “Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin,” ROCK MECHANICS AND ROCK ENGINEERING, pp. 121–141, 2015, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/42940.