Optimization of oxygen requirements in activated sludge treatment plants

Download
008253.pdf
1990
Tunca (Yazıcı), Şengül
Show full item record
101
views
0
downloads
https://hdl.handle.net/11511/4623
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Optimization of bioethanol production from kitchen waste
Uncu, Oya Nihan; Çekmecelioğlu, Deniz; Department of Food Engineering (2009)
Kitchen waste, which is collected in large amounts from cafeterias, restaurants, dining halls, food processing plants, and household kitchens, have become a valuable material for bioprocess engineering. Due to the high carbohydrate fraction, kitchen waste has great potential to be used as a potential substrate for ethanol production. Utilization of it as a raw material in ethanol fermentation would also contribute to reduction of costs. In the first part of this study, the effect of pretreatment method and ...
Optimization of Processing Conditions During Halogen Lamp-Microwave Baking of Cakes
Sevimli, Kadriye Melike; Şümnü, Servet Gülüm; Department of Food Engineering (2004)
The main objective of this study was to optimize processing conditions during halogen lamp-microwave combination baking of cake by using Response Surface Methodology. It was also aimed to compare quality of products baked in microwave-halogen lamp combination oven, halogen lamp oven, microwave oven and conventional oven. In the first part of the study, as independent variables, baking time for conventional oven; microwave power and baking time for microwave oven; halogen lamp power and baking time for halog...
Optimization of roasting conditions of hazelnuts in microwave assisted ovens
Uysal, Nalan; Şümnü, Servet Gülüm; Department of Food Engineering (2009)
The main objective of this study was to optimize the roasting conditions of hazelnuts in microwave-infrared and microwave-convective heating combination ovens by using response surface methodology. It was also aimed to construct regression models for the prediction of quality parameters of hazelnuts as a function of processing conditions. The independent variables were microwave power (10, 30, 50, 70 and 90%), upper-lower infrared power (10, 30, 50, 70 and 90%) and roasting time (2, 3, 4, 5 and 6 min) for m...
Optimization of metalization in crystalline silicon solar cells
Demircioğlu, Olgu; Turan, Raşit; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2012)
Production steps of crystalline silicon solar cells include several physical and chemical processes like etching, doping, annealing, nitride coating, metallization and firing of the metal contacts. Among these processes, the metallization plays a crucial role in the energy conversion performance of the cell. The quality of the metal layers used on the back and the front surface of the cell and the quality of the electrical contact they form with the underlying substrate have a detrimental effect on the amou...
Optimization of energy production from an underground gas storage reservoir
Sınayuç, Çağlar; Kucukeksi, MS (2000-06-01)
The aim of this study is to supply the variable gas demand from an underground gas storage reservoir during heating season by an optimal selection of production rates. Because of the interaction of many influences, parameters, and previous decisions, determination of production rates becomes so involved that the manager can no longer use intuitive judgment. The objective, therefore, is to reach an optimum decision by applying the linear programming method in problem optimization.
Citation Formats
Ş. Tunca (Yazıcı), “Optimization of oxygen requirements in activated sludge treatment plants,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr