Deformation characteristics of simply supported R.C. beams under sustained load.

Date

1966

Author

Fraywat, Shurki

Metadata

Show full item record

Item Usage Stats

37
views

0
downloads

URI

https://hdl.handle.net/11511/4757

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

DEFORMATION ANALYSIS OF TWO LAYER COMPOSITE TUBES UNDER CYCLIC LOADING OF EXTERNAL PRESSURE Eraslan, Ahmet Nedim (2016-01-01) The stress response of axially constrained two-layer composite tubes under cyclic loading of external pressure is investigated in this study. Elastic and elastoplastic stress states for the tube assemblies are examined by developing a mathematical model based on Tresca's yield criterion, its associated ow rule, and linear strain hardening. Using this model, the composite tubes with different dimensions are analyzed under one cycle of loading, unloading, and reloading of external pressure. It is observed tha...
Deformation and failure analysis of laminated composites by isogeometric elements formulation Aydın, Cansın Bade; Darendeliler, Haluk; Department of Mechanical Engineering (2020) The finite element method (FEM) is the most widely used technique for solution ofengineering problems. In classical finite element analysis (FEA) procedure, the exactgeometry generated in computer aided design software is regenerated to have an anal-ysis suitable model, then this model is used for solution. Isogeometric analysis (IGA)is a computational approach which eliminates the modification phase of the actualgeometry in FEA. Instead, IGA employs the same mathematical model which definesthe geometry in ...
Deformation compatibility of masonry and composite materials Bespalov, V. V.; Ucer, D.; Salmanov, I. D.; Kurbanov, I. N.; Kupavykh, S. V. (2018-01-01) Fiber Reinforced Polymers (FRP) are commonly used nowadays for strengthening deteriorated structures. The purpose of this research was to determine the combined behavior of masonry walls and reinforcing meshes together, according to their deformation characteristics. A sample wall with average masonry parameters and seven different common polymer nets on them were modeled in Abaqus Software. Moreover, a case study wall was also modeled according to the strength values obtained from direct testing of a demol...
Deformation Limits for Structural Walls with Confined Boundaries Kazaz, Ilker; Gulkan, Polat; Yakut, Ahmet (SAGE Publications, 2012-08-01) For accurate analytical assessment of performance and damage in reinforced concrete members, well-defined deformation limits at particular damage states are required. With advanced and computationally intensive finite element analyses, we establish deformation limits at yield and ultimate limit states for adequately confined rectangular reinforced concrete structural walls in terms of drift ratio, plastic rotation, and curvature. To investigate the deformation limits of structural walls, a parametric study ...
Deformation Analysis of Elastic-Plastic Two Layer Tubes Subject to Pressure: an Analytical Approach Eraslan, Ahmet Nedim (2004-06-01) Analytical solutions are obtained for axisymmetric elastic-plastic deformations in tightly fitted concentric tubes with fixed ends subjected to either internal or external pressure. Tresca's yield criterion and its associated flow rule are used to estimate the elastic-plastic response of the assembly. The closed form solutions for all elastic-plastic deformation stages are obtained by assuming linear hardening material behavior. Some numerical examples are handled using the mechanical properties of real eng...

Citation Formats

S. Fraywat, “Deformation characteristics of simply supported R.C. beams under sustained load.,” Middle East Technical University, 1966.