POLYMERIZATION OF NORMAL-BUTYL ISOCYANATE BY PRUITT-BAGGETT ADDUCT

1990-10-01
YILMAZ, O
Usanmaz, Ali
ALYURUK, K
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
83
views
0
downloads
General Engineering, General Materials Science
https://hdl.handle.net/11511/50463
JOURNAL OF POLYMER SCIENCE PART C-POLYMER LETTERS
Graduate School of Natural and Applied Sciences, Article

Suggestions

POLYMERIZATION OF N-VINYLCARBAZOLE INITIATED BY UV-RADIATION
USANMAZ, A; Önal, Ahmet Muhtar; BOSTAN, S (Wiley, 1989-01-01)
POLYMERIZATION OF MALEIC-ANHYDRIDE INITIATED BY IMIDAZOLE
HACIOGLU, B; Akbulut, Ural (Informa UK Limited, 1991-01-01)
Imidazole was employed as an anionic initiator for the homopolymerization of maleic anhydride in various solvents. Polymerization was very rapid and the obtained products have different colours varying from white to dark brown. The colour of the product was found to depend on the quantity of imidazole added, and the solvent of polymerization. Darkness of polymers are thought to be due to cross-conjugation displaying paramagnetic character. The ESR signals of dark brown polymers were more intense than th...
ELECTROINITIATED POLYMERIZATION OF BIS(TRIBROMOPHENOXO)-N,N,N',N'-TETRAMETHYLETHYLENEDIAMINE COPPER(II) COMPLEX
Akbulut, Ural; KISAKUREK, D; Toppare, Levent Kamil (Wiley, 1990-01-01)
Tribromophenol copper(II) complexes with ligands such as pyridine and ethylenediamine are known to polymerize thermally. Generally, high temperature is required for thermal polymerization of such complexes. Thermal polymerization of trihalophenol copper(II) complexes in toluene has an induction period of c. 30 min. Electroinitiated polymerization of trihalophenol copper(II) complexes has also been accomplished recently using pyridine or ethylenediamine as ligands. However, the above mentioned copper(II) com...
Failure analysis of fretting fatigue initiation and growth on railway axle press-fits
GURER, G.; Gür, Cemil Hakan (Elsevier BV, 2018-02-01)
Fretting fatigue failure of press fitted railway axle-wheel assembly was presented. Size, distribution and propagation profiles of the circumferential fretting cracks on the full-scale axles were determined by magnetic particle and metallographic slicing methods. The distribution of multiaxial stress cycle along the press-fit seat was obtained by finite element analysis (FEA). The obtained stress path was used for interpretation of fractographic evidence collected at crack initiation sites and the crack pro...
Optical and Nanomechanical Properties of Ga(2)Se(3)Single Crystals and Thin Films
IŞIK, MEHMET; Emir, Cansu; Güllü, Hasan Hüseyin; Hasanlı, Nızamı (Springer Science and Business Media LLC, 2020-10-01)
The optical and nanomechanical properties of Ga(2)Se(3)single crystals and thin films were investigated using reflection, transmission, and nanoindentation measurements. The reflection spectrum recorded in the 525- to 1100-nm range was analyzed to get the band gap energy of the crystal structure, and derivative analysis of the spectrum resulted in band gap energy of 1.92 eV which was attributed to indirect transition. The band gap energy of thermally evaporated Ga(2)Se(3)thin film was determined from the an...
Citation Formats
O. YILMAZ, A. Usanmaz, and K. ALYURUK, “POLYMERIZATION OF NORMAL-BUTYL ISOCYANATE BY PRUITT-BAGGETT ADDUCT,” JOURNAL OF POLYMER SCIENCE PART C-POLYMER LETTERS, pp. 341–343, 1990, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/50463.
METU IIS - Integrated Information Service open@metu.edu.tr