Deformation Analysis of Deep-Drawing by a Finite Element Method

Date

1991-01-01

Author

Darendeliler, Haluk

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

140
views

0
downloads

A finite element method is developed to study the elastic-plastic deformation of sheet materials in the presence of large strains and large displacements. It is based on updated Lagrangian type formulation and membrane shell theory. The sheet is assumed to be isotropic and rate insensitive which obeys J2 flow theory. The work-hardening characterstics of material and Coulomb friction between the sheet metal and forming tools are incorporated. The method is used for modelling partial deep-drawing with the appropriate boundary, conditions. Numerical solutions are compared with the experimental results. © 1991 CIRP.

Subject Keywords

Forming , Deep-drawing

URI

https://hdl.handle.net/11511/56110

Journal

CIRP Annals - Manufacturing Technology

DOI

https://doi.org/10.1016/s0007-8506(07)61987-8

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

The effect of strain rate and temperature on deep drawing for different constitutive relations Gökşen, Seçkin; Darendeliler, Haluk; Department of Mechanical Engineering (2019) In this study, the effects of strain rate and temperature on deep drawing process are investigated by considering different yield criteria and hardening models. For this purpose, various punch velocity and temperature values are considered using 1 mmthick DKP6112 and AZ31 sheet materials. The results are compared according to thickness strain distribution and punch force obtained by a commercial finite element software. To express constitutive relations of corresponding materials for different strain rate a...
Deformation patterning driven by rate dependent non-convex strain gradient plasticity Yalçınkaya, Tuncay; Geers, M.G.D. (2011-01-01) A rate dependent strain gradient plasticity framework for the description of plastic slip patterning in a system with non-convex energetic hardening is presented. Both the displacement and the plastic slip fields are considered as primary variables. These fields are determined on a global level by solving simultaneously the linear momentum balance and the slip evolution equation which is postulated in a thermodynamically consistent manner. The slip law differs from classical ones in the sense that it includ...
Modelling and simulation of friction in deep drawing Başpınar, Murat; Akkök, Metin; Department of Mechanical Engineering (2011) Different contact surface parameters and operating characteristics are observed during the deep drawing process. It is not possible to find a formulation that can be used for all lubrication regimes. Therefore, several friction models have been developed in order to overcome this problem. In this study, a math program is developed which combines Wilson’s and Khonsari’s friction models in a new model in order to increase accuracy and efficiency in friction calculations. By comparing the results of both frict...
Fatigue crack growth analysis models for funcionally graded materials Sabuncuoğlu, Barış; Dağ, Serkan; Department of Mechanical Engineering (2006) The objective of this study is to develop crack growth analysis methods for functionally graded materials under mode I cyclic loading by using finite element technique. The study starts with the analysis of test specimens which are given in ASTM standard E399. The material properties of specimens are assumed to be changing along the thickness direction according to a presumed variation function used for the modeling of functionally graded materials. The results of the study reveal the influence of different...
3D printing of crude lignocellulosic biomass extracts containing hemicellulose and lignin Gokce Bahcegul, E.; Bahcegul, Erinc; Özkan, Necati (2022-10-15) © 2022 Elsevier B.V.Using lignocellulosic biomass, which is composed mainly of cellulose, hemicellulose and lignin, as a biopolymer resource in various polymeric material applications is an attractive option due to its abundance, biodegradability and renewability. Cellulose is the most popular member of the biopolymer trio for material applications, but despite constituting around half of a lignocellulosic biomass, attention hemicellulose and lignin receive is restricted in this sense, which gets even more ...

Citation Formats

H. Darendeliler, “Deformation Analysis of Deep-Drawing by a Finite Element Method,” CIRP Annals - Manufacturing Technology, pp. 281–284, 1991, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56110.