Bem Solution Of Mhd Flows İn Coupled Ducts

2012-12-31
Bu projede viskoz, sıkıştırılamaz ve elektrikçe iletken bir sıvının ortadan bir bariyer ile ayrılmış dikdörtgen bir kanaldaki magnetohidrodinamik akımı incelenecektir. Bariyer kısmen elektrikçe iletken, kısmen yalıtkan olarak kabul edilmiştir ve kanalın dışında bir manyetik alan etkisi bulunmaktadır. Kanalın iki ayrı kısmında tanımlanan ve sıvının hızları ile indüklenmiş manyetik alanları bilinmeyen olarak içeren kuple denklemler, sınır koşulları ile birbirine bağlantılıdır ve çözümde bunlar zorluklar içermektedir. Denklemler sınır elemanları metodu ile nümerik olarak çözülecek ve kanaldaki akım modelinin davranışları incelenecektir. Projenin ilk altı ayında, proje ekibinin daha önce teorik olarak geliştirdikleri iki kuple denklem için temel çözüm dört denkleme ikili gruplar halinde uygulanacaktır. Bariyer üzerinde tanımlanan dört bilinmeyeni bağlantılı olarak içeren sınır koşulları, sınır elemanları formülasyonu yapılırken uygulanacak ve sonuçtaki sistemde ayrıklaştırılmış denklem ve bilinmeyen sayıları eşit olacak şekilde ayarlanacaktır. İkinci altı ayda, nümerik çözüm elde edilecek (bilgisayar programı yazılarak), sonuçlar yüksek Hartmann sayısı içerene kadar çalışılacak ve grafik çizimleri ile yorumlanacaktır. Bu çalışmanın sonuçlarının yayına dönüştürülmesi planlanmaktadır.

Suggestions

FEM APPROXIMATION OF MAXWELL EQUATIONS: THE SOURCE PROBLEM, EIGENPROBLEM, AND ELECTROMAGNETIC WAVES
Dağlı, Tugay; Türk, Önder; Department of Scientific Computing (2023-1-25)
In this thesis, edge-based finite element method (FEM) approximations of Maxwell's equations describing the relationship between the space variables and sources along the electromagnetic field are considered. In particular, the lowest-order Nédélec basis functions are implemented to construct the FEM model of the Maxwell source problem, Maxwell eigenvalue problem (EVP), and electromagnetic wave propagation problem. A computational model is constructed to conduct all these problems in the same framework of a...
BEM SOLUTIONS OF MAGNETOHYDRODYNAMIC FLOW EQUATIONS UNDER THE TIME AND AXIAL-DEPENDENT MAGNETIC FIELD
Ebren Kaya, Elif; Tezer, Münevver; Department of Mathematics (2021-9-6)
In the thesis, four different MHD duct flow problems are solved by using the Dual Reciprocity Boundary Element Method (DRBEM) with the suitable boundary conditions according to the physics of the problem. The two-dimensional, steady or unsteady, fully-developed MHD flow of a viscous, incompressible and electrically conducting fluid is considered in a long pipe of rectangular cross-section (duct) under the effect of an externally applied magnetic field which is either uniform or time-dependent or axially ch...
Magnetohydrodynamic Flow İn An Electrodynamically Conducting Semi-İnfinite Strip
Tezer, Münevver(2011-12-31)
Bu projede viskoz, sıkıştırılamaz ve elektrikçe iletken sıvıların iki boyutlu yarı sonsuz şerit içerisindeki magnetohidrodinamik (MHD) akım denklemleri nümerik olarak çözülecektir. Çözüm yöntemi olarak sınır elemanları metodu kullanılacak, ancak problemin tanım bölgesi yarı sonsuz şerit olduğu için çözümün sonsuzdaki davranışları incelenerek yakınsaklık şartları elde edilecektir. Sonsuz bölgeye ulaşma durumundaki sınır koşulları problemin iyi konumlu ve çözümün kararlı olmasına uygun olacak şekilde ayarlana...
Second law anlysis of solid oxide fuel cells
Bulut, Başar; Yamalı, Cemil; Yüncü, Hafit; Department of Mechanical Engineering (2003)
In this thesis, fuel cell systems are analysed thermodynamically and electrochemically. Thermodynamic relations are applied in order to determine the change of first law and second law efficiencies of the cells, and using the electrochemical relations, the irreversibilities occuring inside the cell are investigated. Following this general analysis, two simple solid oxide fuel cell systems are examined. The first system consists of a solid oxide unit cell with external reformer. The second law efficiency cal...
Experimental investigation of flow characteristics of flexible wings with different stiffener orientations in linear translating motion
Karakaş, Hasan Halil; Perçin, Mustafa; Department of Aerospace Engineering (2022-8-12)
This study experimentally investigates the flow field around the wings, which first accelerate with constant acceleration from the rest and then perform a linear translating motion with constant velocity. Four wings, which are 3D-printed, with a bending stiffness in different directions are examined. The difference in bending stiffness values is achieved by placing stiffeners having different angles with the leading edge on the upper surface of the wing. The stiffeners are printed with wings to obtain well-...
Citation Formats
C. Bozkaya, “Bem Solution Of Mhd Flows İn Coupled Ducts,” 2012. Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/58637.