Correlation of geotechnical parameters of the İzmir sewerage plant site area

Download
1989
Onur, Türker

Suggestions

Correlations of soil parameters obtained from in-situ tests at the Karakaya Railroad Bridge site.
Ozdil, Zeynep Feryal; Department of Civil Engineering (1985)
Correlations of SPT, CPT and pressuremeter test data in alluvial soils. Case study: Tabriz Metro Line 2, Iran
Firuzi, Mahnaz; Asghari-Kaljahi, Ebrahim; Akgün, Haluk (Springer Science and Business Media LLC, 2019-10-01)
The Menard pressuremeter modulus (E-m), limit pressure (P-L), shear modulus (G) and subgrade reaction modulus (K-s) can be obtained by using the pressuremeter test, and are needed as parameters to obtain the geotechnical parameters for foundation design and to determine the ultimate bearing capacity in engineering projects. In this article, correlations of Menard pressuremeter tests (PMTs) with standard penetration tests (SPTs) and cone penetration tests (CPTs) are obtained as a consequence of the extensive...
Comparison of energy-based seismic structural responses based on simulated ground motions with existing empirical relationships
Askan Gündoğan, Ayşegül; Karim Zadeh Naghshineh, Shaghayegh; Erberik, Murat Altuğ (null; 2017-12-11)
energy demand of an earthquake. Majority of the previous studies have utilized existing real ground motion sets for energy-based seismic response evaluation. However, in regions where there is lack of real records from potential events with large magnitudes, simulated motions could be employed alternatively. One important task is to investigate the suitability of the simulated motions in energy-based response evaluation of structural systems. Since these records provide a controlled variability in seismic d...
Comparison of energy-based seismic structural responses based on simulated ground motions with existing empirical relationships
Karim Zadeh Naghshineh, Shaghayegh; Askan Gündoğan, Ayşegül; Erberik, Murat Altuğ (2018-09-12)
Correlation of criteria for perforation and pore plugging by particles
Iscan, A. Gurkan; Civan, Faruk (Begell House, 2006-01-01)
Particles at high concentrations and unfavorable flow conditions may plug pores and perforations by bridging across during various well operations including particle-containing water injections and workover activities. This study presents an experimental determination of the conditions leading to plugging and the criteria for effective plugging conditions. The charts of the perforation or pore size to particle size ratio versus the particle Reynolds number are shown to determine the conditions leading to pe...
Citation Formats
T. Onur, “Correlation of geotechnical parameters of the İzmir sewerage plant site area,” Middle East Technical University, 1989.