Detailed layout planning for jobbing and batch manufacture.

Date

1980

Author

Gürlek, Bilgehan

Metadata

Show full item record

Item Usage Stats

74
views

0
downloads

URI

https://hdl.handle.net/11511/6171

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Comprehensive analysis and modeling of landfill leachate Ergene, Didar; Aksoy, Ayşegül; KURTULUŞ, DİLEK FUNDA (2022-05-15) © 2022 Elsevier LtdLandfill leachate data compiled from 220 different landfills from 46 countries in Europe, Middle East, Asia, Africa, and America was analysed by multivariate statistical approaches. Data pre-treatment procedure such as handling of outliers, completion of missing data, and standardization of data was applied to prepare the raw data matrix for the complex statistical analyses including cluster and principal component analyses (PCA). Regression modeling was conducted to estimate leachate par...
Comprehensive Report on Design and Development of a 100-kW DSSRM Maharjan, Lizon; et. al. (2018-12-01) Switched reluctance machines (SRMs) are low cost and fault tolerant alternatives for traction applications. Due to their relatively low torque density and high torque ripple, these machines have not been used in commercialized electrified power trains yet. The double-stator magnetic configuration, where a segmental rotor shared between two stators, is proven to have superior torque density, lower acoustic noise, and torque pulsation. The double-stator SRM (DSSRM) has a high potential of being the next gener...
Detailed load rating analyses of bridge populations using nonlinear finite element models and artificial neural networks Hasançebi, Oğuzhan (2013-11-01) For assessing load rating capacity of bridges, American Association of State Highway and Transportation Officials Manual (AASHTO) recommends a simple method, where distribution of the forces in transverse direction is estimated by axle-load distribution factors on a simply supported beam. Although the method is practical in the sense that it allows for rapid evaluation of bridge populations, it leads to over-conservative load ratings. A finite element (FE) based load rating analysis is conceived as a more a...
Detailed Noise Analysis of Current-to-Frequency Converters for Precision Analog Accelerometers Nuzumlali, Omer Lutfi (2016-04-14) This paper presents a detailed noise analysis of current-to-frequency converters (CFC) for current output precision analog accelerometers. In the proposed method, time domain approach is used instead of frequency domain approach and the standard deviation of the velocity error after a fixed period of time is calculated. The noise analysis demonstrates that the error caused by voltage noises does not increase with time. However, the standard deviation of the error due to the feedback current noise increases ...
Detailed modeling and control of a 2-DOF gimbal system Poyrazoğlu, Erhan; Leblebicioğlu, Mehmet Kemal; Department of Electrical and Electronics Engineering (2017) Gimbal systems are used in various engineering applications such as military systems. Their conﬁgurations are designed according to the types of application and desired performance requirements. The essential aim of these systems is to compensate the disturbance effects in order to stabilize LOS and positioning to the desired point. In this thesis, ﬁrst, a detailed mathematical model of a 2-DOF gimbal system containing some nonlinear dynamic effects such as friction, static and dynamic mass unbalance is obt...

Citation Formats

B. Gürlek, “Detailed layout planning for jobbing and batch manufacture.,” Middle East Technical University, 1980.