Communication Coverage in Wireless Passive Sensor Networks

Date

2009-02-01

Author

Bereketli, Alper
Akan, Ozgur B.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

224
views

0
downloads

System lifetime of wireless sensor networks (WSN) is inversely proportional to the energy consumed by critically energy-constrained sensor nodes during RF transmission. In that regard, modulated backscattering (MB) is a promising design choice, in which sensor nodes send their data just by switching their antenna impedance and reflecting the incident signal coming from an RF source. Hence, wireless passive sensor networks (WPSN) designed to operate using MB do not have the lifetime constraints of conventional WSN. However, the communication performance of WPSN is directly related to the RF coverage provided over the field the passive sensor nodes are deployed. In this letter, RF communication coverage in WPSN is analytically investigated. The required number of RF sources to obtain interference-free communication connectivity with the WPSN nodes is determined and analyzed in terms of output power and the transmission frequency of RF sources, network size, RF source and WPSN node characteristics.

Subject Keywords

Sensor networks, Wireless passive sensor networks, Modulated backscattering, Communication coverage

URI

https://hdl.handle.net/11511/65018

Journal

IEEE COMMUNICATIONS LETTERS

DOI

https://doi.org/10.1109/lcomm.2009.081691

Collections

Department of Electrical and Electronics Engineering, Article

Suggestions

OpenMETU
Core

Life time sensitive weighted clustering on wireless sensor networks Alizadeh Jarchlo, Elnaz; Bazlamaçcı, Cüneyt Fehmi; Department of Information Systems (2013) Wireless Sensor Networks typically include wireless sensor nodes with limited energy. Network lifetime and scalability are considered as two significant requirements for sensor network applications. In order to decrease energy consumption and increase network lifetime one can apply an efficient clustering method. The application of the clustering method proposed in this thesis (LTS-WCA) leads to reducing the energy cost and the transmission distance of each node by grouping the nodes in several clusters and...
Analysis and modeling of routing and security problems in wireless sensor networks with mathematical programming İncebacak, Davut; Baykal, Nazife; Bıçakcı, Kemal; Department of Information Systems (2013) Wireless Sensor Networks (WSNs) are composed of battery powered small sensor nodes with limited processing, memory and energy resources. Self organization property together with infrastructureless characteristics of WSNs make them favorable solutions for many applications. Algorithms and protocols developed for WSNs must consider the characteristics and constraints of WSNs but since battery replenishment is not possible or highly challenging for sensor nodes, one of the major concerns in designing network p...
Wearable battery-less wireless sensor network with electromagnetic energy harvesting system Chamanian, Salar; Ulusan, Hasan; Zorlu, Ozge; Baghaee, Sajjad; Uysal, Elif; Külah, Haluk (2016-10-01) This paper presents a battery-less wireless sensor network (WSN) equipped with electromagnetic (EM) energy harvesters and sensor nodes with adjustable time-interval based on stored the energy. A wearable EM energy harvesting system is developed and optimized to power-up a typical wireless sensor mote from body motion. This is realized through characterization of the body motion and design of a compact EM energy harvester according to vibration frequencies generated during human running and walking. The harv...
Path planning and localization for mobile anchor based wireless sensor networks Erdemir, Ecenaz; Tuncer, Temel Engin; Department of Electrical and Electronics Engineering (2017) In wireless sensor networks, sensors with limited resources are distributed in a wide area. Localizing the sensors is an important problem. Anchor nodes with known positions are used for sensor localization. A simple and efficient way of generating anchor nodes is to use mobile anchors which have built-in GPS units. In this thesis, a single mobile anchor is used to traverse the region of interest to communicate with the sensor nodes and identify their positions. Therefore planning the best trajectory for th...
Immune system based distributed node and rate selection in wireless sensor networks Atakan, Baris; Akan, Ozguer B. (2006-12-13) Wireless sensor networks (WSNs) are event-based systems that rely on the collective effort of dense deployed sensor nodes. Due to the dense deployment, since sensor observations are spatially correlated with respect to spatial location of sensor nodes, it may not be necessary for every sensor node to transmit its data. Therefore, due to the resource constraints of sensor nodes it is needed to select the minimum number of sensor nodes to transmit the data to the sink. Furthermore, to achieve the application-...

Citation Formats

A. Bereketli and O. B. Akan, “Communication Coverage in Wireless Passive Sensor Networks,” IEEE COMMUNICATIONS LETTERS, pp. 133–135, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65018.