Investigation and design of deflectograph to measure flexibe road pavement deflection.

Yal, Merih


Investigation and comparison of bearing devices used in high-speed railway bridges under earthquake impact
Aşcı, Uğur; Caner, Alp; Department of Earthquake Studies (2019)
This study covers the investigation of behavior and comparison of two bearing types (elastomeric and pot bearings) under earthquake effects. Real earthquake records are used in this study. Earthquake selection is an important process. The plan behind the selection process is to cover the earthquakes with high occurrence rates in real life and to gain more realistic results. Magnitudes of selected earthquakes are 6.0, 6.5 or 7.0. The location assumed at which the effects of earthquakes investigated is 15 to ...
Investigation of field engineering properties of asbestos base low solid drilling fluids.
Company, Farhad Zamany; Department of Petroleum Engineering (1981)
Sıcak-Nemli̇ İkli̇mde Çi̇ft Kabuk Cephe Enerji̇ Performansının İncelenmesi̇
Göksal Özbalta, Türkan; Yıldız, Yusuf (Middle East Technical University, Faculty of Architecture, 2019-9-25)
In buildings, which have a significant share of energy consumption, the proper construction and design of the building envelope is an important issue on all countries due to environmental problems and energy supply. Therefore, controlling the heat loss/gain from the building envelope is an inevitable necessity when considering the increasing building stock in Turkey. Reducing the amount of energy consumed in both new and existing buildings leads to new environmental and climate-sensitive approaches. Double ...
Investigation of microstructure-ultrasonic velocity relationship in SiCp-reinforced aluminium metal matrix composites
Gür, Cemil Hakan (Elsevier BV, 2003-11-25)
Twenty-one sets of specimens were fabricated by hot pressing powder mixtures containing various volume and size combinations of pure Al and SiC particles. Neither heat treatment nor secondary deformation processes were applied. The microstructures of the specimens were characterised by optical and scanning electron microscopy. Using a 10 MHz probe, the velocity of ultrasonic longitudinal waves was measured. The results show that in general the ultrasonic velocity increases with an increase in SiC content. H...
Investigation of automatic start-up possibility for a fluidizaiton bed lignite combustor.
Mıdoğlu, Haldun; Department of Electrical Engineering (1985)
Citation Formats
M. Yal, “Investigation and design of deflectograph to measure flexibe road pavement deflection.,” Middle East Technical University, 1979.