Development of computer program for the estimimation of pollution resistance variation in series with discharges on the polluted insulator surfaces.

Date

1981

Author

Ergnenç, Sabahattin

Metadata

Show full item record

Item Usage Stats

38
views

0
downloads

URI

https://hdl.handle.net/11511/6575

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Development of a computer program for ultimate strength of rectangular steel box girders. Uykur, A. Berkhan; Department of Civil Engineering (1985)
Development of a test system for viscoelastic material characterization Erol, Fulya; Özgen, Gökhan Osman; Department of Mechanical Engineering (2014) Viscoelastic materials are used extensively as a means of vibration control and isolation in many vibrating structures. For example, damping instruments utilizing viscoelastic materials such as surface damping treatments and vibration isolators fabricated of viscoelastic materials such as machinery mounts are widely used in automotive and aerospace industries for the purpose of vibration and noise control and isolation, respectively. Viscoelastic materials, as the name implies, behave in between a purely el...
Development of a test system for viscoelastic material characterization Erol, Fulya; Özgen, Gökhan Osman; Ardıç, Halil; Erdoğan, Bilgehan; Özkan, Sami Samet (2014-07-03)
Development of an In-house Computer Code for the Thermal Analysis of Satellites Using Thermal Network Method and Method of Lines Uygur, Ahmet Bilge; Isik, Hasan Guerguec; Solakoglu, Erhan; Yazicioglu, Almila Guevenc (2009-06-13) This paper discusses the development of an in-house computer code for the thermal analysis of satellites. The code uses Thermal Network Method (TNM) in conjunction with the Method of Lines (MOL) for the solution of the energy equation in the presence of radiative heat transfer. The predictive accuracy of the code is demonstrated on a test problem involving a cubic satellite with two solar panels and a single representative payload at its center to account for all other possible equipments in the satellite. ...
Development of a methodology for prediction of surface rougness of curved cavities manufactured by 5-axes cnc milling Çelik, Kazım Arda; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2007) The surface quality is identified by surface roughness parameters. The average surface roughness (Ra) is used in this study, as it is the most commonly used roughness parameter in the industry. A particular curved cavity of a forging die is selected for the experimental study. Different milling methods are tested. The comparison studies are conducted between 3-axes and 5-axes milling, linear and circular tool path strategies and down and up milling. According to the experimental study, appropriate method is...

Citation Formats

S. Ergnenç, “Development of computer program for the estimimation of pollution resistance variation in series with discharges on the polluted insulator surfaces.,” Middle East Technical University, 1981.