Modelling of annular pressure build-up in the sealed annuli of a sub-sea well

Kerem, Murat


Modelling of variable friction in cold forging
Cora, Oe N.; Akkök, Metin; Darendeliler, Haluk (2008-11-01)
In metal forming operations, the friction between die and workpiece is a complex phenomenon and has a strong influence on the metal forming parameters and the product quality This study aims to investigate the effect of friction in cold forging operations using different friction models. In the analyses, the forging operations are simulated using the Coulomb and constant friction models, and the results are compared with the simulation results obtained by using the variable friction models developed by Wanh...
Modelling of two-phase flow through concentric annuli
Ozbayoglu, M. E.; Omurlu, C. (Informa UK Limited, 2007-01-01)
A mathematical model is introduced in order to predict the flow characteristics of multiphase flow through an annulus. Flow patterns and frictional pressure losses estimated using the proposed model are compared with the experimental data of a wide range of liquid and gas flow rates recorded at a flow loop consisting of numerous circular pipes and annulus. The results showed that the model predictions for flow patterns and frictional pressure losses are reasonably accurate. Moreover, it is observed that geo...
Modelling of dilute liquid-solid upward flows through a vertical concentric annulus
Şahin, Ebru; Özbelge, Tülay A.; Department of Chemical Engineering (2000)
Modelling of sound fields inside acoustically-structurally coupled fields by a combined method
Sorguç, Arzu (2000-01-01)
Modelling of zeolite crystallization
Uzunalimoğlu, Naime Aslı; Çulfaz, Ali; Department of Chemical Engineering (1991)
Citation Formats
M. Kerem, “Modelling of annular pressure build-up in the sealed annuli of a sub-sea well,” Middle East Technical University, 2000.