Dolmuşun (Uzun) Öyküsü: Basımının Kırkıncı Yılında İlhan Tekeli ve Tarık Okyay’ın Benzersiz Çalışması Üzerine

Date

2020-04-01

Author

Zırh, Besim Can

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

191
views

0
downloads

URI

https://hdl.handle.net/11511/69574

Journal

İdealkent

DOI

https://doi.org/10.31198/idealkent.689860

Collections

Department of Sociology, Article

Suggestions

OpenMETU
Core

Effects of fillers on morphological, mechanical, flow and thermal properties of bituminous composites Tayfun, Ümit; Bayramlı, Erdal; Department of Polymer Science and Technology (2006) There are many different types of fillers used for bitumen modification such as; silica, limestone, basalt, mica, oyster shells. Filler gives rigidity, stiffness or hardness, regulates thermal expansion and shrinkage, improves heat resistance, and modifies rheological properties of bituminous composites. The main objective of this study was to determine the effect of filler type and ratio on mechanical, thermal properties and morphologies of bitumen based composites. It was also aimed to improve the heat re...
Seismic strengthening of masonry infilled reinforced concrete frames with precast concrete panels Süsoy, Melih; Tankut, Ali Tuğrul; Department of Civil Engineering (2004) Over 90% of the land area of Turkey lies over one of the most active seismic zones in the world. Hazardous earthquakes frequently occur and cause heavy damage to the economy of the country as well as human lives. Unfortunately, the majority of buildings in Turkey do not have enough seismic resistance capacity. The most commonly observed problems are faulty system configuration, insufficient lateral stiffness, improper detailing, poor material quality and mistakes during construction. Strengthening of R/C fr...
Influence of surface treatment of fillers on the mechanical properties of thermoplastic polyurethane composites Tayfun, Ümit; Bayramlı, Erdal; Yılmazer, Ülkü; Department of Polymer Science and Technology (2015) The incompatibility between filler and polymer matrix is the major restriction for the production of composites to have desirable properties. Several surface modification methods are applied to filler surface in order to improve the interfacial adhesion with polymer matrix. Easy processablity and fully recyclability character of thermoplastic polyurethane (TPU) make it cost effective for many applications. Majority of TPU application is across a range of markets including automotive, sporting goods, medical...
Computer assisted analysis of flow over spillway chutes Kıranoğlu, Meriç; Yanmaz, A. Melih.; Department of Civil Engineering (2019) In this study, a literature review is conducted in terms of assumptions, approaches, and various calculation methods used for the analysis of flow over conventional and stepped type spillways. In guidance of this review, a software is developed to perform such analyses with the set of given data by the user, and display results with some tables and figures. To this end, water surface profile over the spillway face is determined considering air entrainment process, pressure distribution over the crest under ...
Dolgu barajların sismik performanslarının sayısal yöntemlerle belirlenmesi - bir vaka örneği Bilge, Habib Tolga; Çetin, Kemal Önder (2014-10-11)

Citation Formats

B. C. Zırh, “Dolmuşun (Uzun) Öyküsü: Basımının Kırkıncı Yılında İlhan Tekeli ve Tarık Okyay’ın Benzersiz Çalışması Üzerine,” İdealkent, pp. 406–431, 2020, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/69574.