Hyrogen storage capacity investiations of Pd loading ratio on ME-CNTs via Supercritical Fluid deposition metod

2018-03-15
Erünal, Ebru
Ulusal, Fatma
Odabaşı, Selda
Güzel, Bilgehan
Üner, Deniz

Suggestions

Hydride generation and preconcentration of bismuth on a single-drop followed by determination using electrothermal atomic absorption spectrometry
Dügencili, Başak; Ataman, Osman Yavuz; Department of Chemistry (2015)
A novel method for determination of bismuth is proposed where the analyte is converted to its hydride form, BiH3, followed by head space preconcentration on a single aqueous drop; final detection was done using electrothermal atomic absorption spectrometry (ETAAS). The preconcentration step was named as headspace single-drop microextraction (HS-SDME). Experimental parameters for hydride generation using both continuous flow and batch technique, ETAAS and finally HS-SDME were optimized. For HS-SDME, Pd, Ni, ...
Pyrolysis of of poly(methy methacrylate) copolymers
Ozlem-Gundogdu, Suriye; Gurel, Evren Aslan; Hacaloğlu, Jale (2015-05-01)
In this work, thermal degradation of copolymers of poly(methy methacrylate) namely, poly(methyl methacrylate-co-n-butyl acrylate), P(MMA-co-nBu), poly(methyl methacrylate-co-n-benzyl methacrylate) P(MMA-co-BzMA, and poly(methyl methacrylate-co-isobornyl acrylate), P(MMA-co-IBA) were investigated via direct pyrolysis mass spectrometry. It was determined that whether an available gamma-H with respect to the carbonyl groups is present or not determines the thermal degradation mechanisms of polyacrylates and po...
Pyrolysis kinetics of oil shales determined by DSC and TG/DTG
Kök, Mustafa Verşan (2003-04-09)
Kinetics of oil shale pyrolysis was studied by differential scanning calorimetry and non-isothemal thermogravimetry. In nitrogen atmosphere two different mechanisms causing mass loss were observed: distillation in the region between ambient temperature and 500 K, visbreaking and cracking in the region of 500-800 K. Kinetic parameters of the sample pyrolysis are determined using different kinetic models, and the results are discussed.
Pyrolysis characteristics of Turkish lignites in N-2 and CO2 environments
BARZEGAR, RAMİN; Avşaroğlu, Sevil; Yozgatlıgil, Ahmet; Atımtay, Aysel (2018-01-01)
Pyrolysis characteristics and kinetic parameters of two Turkish lignites having different ash contents (Orhaneli as low ash and Soma as high ash sample) were studied under N-2 and CO2 atmospheres by means of thermogravimetric analysis. The isoconversional kinetic methods of FlynnWallOzawa, KissingerAkahiraSunose, and Friedman were employed to estimate the activation energy and pre-exponential factors. The experiments were conducted at four different heating rates of 5, 10, 15, and 20 degrees C/min within th...
Epoxidation of Propylene on a [Ag14O9] Cluster Representing Ag2O (001) Surface: A Density Functional Theory Study
Fellah, Mehmet Ferdi; Önal, Işık (2012-01-01)
Density functional theory calculations were employed to study partial oxidation of propylene on a [Ag14O9] cluster representing Ag2O (001) surface for which positive effect for ethylene oxide formation has been reported in our earlier work at the same level of theory (Fellah et al., Catal Lett 141: 762, 2011). Propylene oxide (PO), propanal, acetone and G-allyl radical formation reaction mechanisms were investigated. P-allyl formation path and two propylene adsorption paths resulting in PO formation are com...
Citation Formats
E. Erünal, F. Ulusal, S. Odabaşı, B. Güzel, and D. Üner, “Hyrogen storage capacity investiations of Pd loading ratio on ME-CNTs via Supercritical Fluid deposition metod,” 2018, vol. 1, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71232.