Use of the cylindrical wedge shear test for the compaction control of clay fills

Download
007304.pdf
1989
Varan, Mustafa
Show full item record
65
views
0
downloads
https://hdl.handle.net/11511/7151
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Use of split-disk tests for the process parameters of filament wound epoxy composite tubes
Kaynak, Cevdet; PARNAS, LEVENT; ŞENEL, FİKRET (2005-08-01)
The aim of this study was to investigate processing parameters of continuous fiber reinforced epoxy composite tubes produced by the filament winding technique. For this purpose, split-disk tests (according to ASTM D-2290 standard) were performed for the specimens produced with two different epoxy resin systems, five different fiber materials and five different winding angles. By determining the hoop tensile strength and modulus of these specimens, the effects of three filament-winding processing parameters;...
Use of dynamic modulus of elasticity to assess the durability of self consolidating concrete
Özerkan, N.G.; Yaman, İsmail Özgür (2012-12-01)
This paper presents the effect of freezing-thawing on self consolidating concrete (SCC) that contains different percentages of fly ash (FA) and air entraining agents (AEA). The effect of freezing-thawing on concrete is assessed on the basis of the change in the dynamic modulus of elasticity. The dynamic modulus of elasticity is determined from both ultrasonic pulse velocity and resonant frequency tests. An in-house resonant frequency test apparatus was developed using an accelerometer and a data acquisition...
Use of the transient response profiles in determining the spreadability of a specific cream cheese, linera
Güney, Refik Berkan; Katnaş, Zeynep; Department of Food Engineering (1997)
Use of pro scale simulatiors to understand the effects of wettability on miscible carbon dioxide flooding and injectivity
Uzun, İlkay; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2005)
This study concentrates on the modelling of three phase flow and miscible CO2 flooding in pore networks that captures the natural porous medium of a reservoir. That is to say, the network, that is a Matlab code, consists of different sided triangles which are located randomly through the grids. The throats that connect the pores are also created by the model. Hence, the lengths and the radii of the throats are varying. The network used in this research is assumed to be representative of mixed-wet carbonates...
Use of Activation Time Based Kalman Filtering in Inverse Problem of Electrocardiography
Aydin, Umit; Serinağaoğlu Doğrusöz, Yeşim (2008-11-27)
The goal of this study is to solve inverse problem of electrocardiography (ECG) in terms of epicardial potentials using body surface (torso) potential measurements. The problem is ill-posed and regularization must be applied. Kalman filter is one of the regularization approaches, which includes both spatial and temporal correlations of epicardial potentials. However, in order to use the Kalman filter, one needs the state transition matrix (STM) that models the time evolution of the epicardial potentials. In...
Citation Formats
M. Varan, “Use of the cylindrical wedge shear test for the compaction control of clay fills,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr