A comparison between maximum shear strain distribution in a uniformly elastic half layer and that in a layered viscoelastic medium due to the same free field motion

2016-09-23
Dehghanian, Kaveh
Yılmaz, Mustafa Tolga
Show full item record
72
views
0
downloads
http://www.ace2016.org/en/CONTACT.html
https://hdl.handle.net/11511/71563
12th International Congress on Advances in Civil Engineering
Department of Engineering Sciences, Conference / Seminar

Suggestions

A comparison of two novel direct adaptive control methods under actuator failure accommodation
Kutay, Ali Türker; Calise, Anthony J.; Johnson, Eric N. (null; 2008-12-01)
In flight control systems it is crucial to accommodate actuator failures for safe operation. Modern flight control systems are equipped with multiple power sources and actuation systems that offer redundancy in the event of actuator failures. Traditional approaches to flight control system design involve scheduling of fixed gain controllers and control allocation to take full advantage of redundant actuators. Alternative adaptive control approaches have been extensively investigated recently to provide enha...
A Comparison of Select Direct Adaptive Control Methods Under Actuator Failure Accommodation
Kutay, Ali Türker; Calise, Anthony J; Johnson, Eric N (2008-08-14)
A detailed ensemble Monte Carlo study of the effect of quantum well width on quantum well infrared photodetector characteristics
Memiş, S.; Cellek, O.o.; Bostanci, U.; Tomak, Mehmet; Beşikci, Cengiz (2006-10-10)
We present a simulation based investigation of the dependence of the device characteristics on the quantum well width in AlGaAs/GaAs quantum well infrared photodetectors (QWIPs) through the ensemble Monte Carlo technique. The simulations on two different standard Al0.3Ga0.7As/GaAs QWIPs with quantum well widths of 36 and 44 Å have shown that the gain in the former is considerably higher, which is due to much longer lifetime of the photoexcited electrons as a result of lower capture probability in the device...
A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite
Saltik, Simge; ESEN, ZİYA; Dericioğlu, Arcan Fehmi (2022-10-01)
This study has focused on the influence of size and content of SiC particle incorporation on the wetting behavior of the Ticusil brazing filler alloy and on its brazing performance in C/SiC composite/Ti6Al4V alloy joints. The effect of the size and content of additive SiC particles on the variation of molten brazing filler alloy contact angle was recorded at various brazing time and temperatures. Moreover, the microstructural evolution and mechanical properties of the additive containing C/SiC composite/Ti6...
A Case study for calculating and reporting the uncertainty budget of 1 and 2 dimensional combined hydraulic model
Gül, Uğraş Sidar; Altan Sakarya, Ayşe Burcu; Department of Civil Engineering (2019)
This study aims to suggest a framework to quantify and report the uncertainty budget of a 1 & 2 dimensional hydraulic model of five possible error sources by using ISO GUM method. The river engineers take into account several considerations when they design the riverbeds; one of the main considerations is the flood protection aspect of the riverbed, to asses that a hydraulic model is usually prepared. However, results generated from the hydraulic models are not exempt from errors. The ISO GUM method provide...
Citation Formats
K. Dehghanian and M. T. Yılmaz, “A comparison between maximum shear strain distribution in a uniformly elastic half layer and that in a layered viscoelastic medium due to the same free field motion,” presented at the 12th International Congress on Advances in Civil Engineering, 2016, Accessed: 00, 2021. [Online]. Available: http://www.ace2016.org/en/CONTACT.html.
METU IIS - Integrated Information Service open@metu.edu.tr