A work study for steel modular form panels and production cost control

Download
010518.pdf
1990
Kutay, Murat
Show full item record
50
views
0
downloads
https://hdl.handle.net/11511/7176
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A comperative assessment of available methods for seismic performance evaluation of buried structures
Özcebe, Ali Güney; Çetin, Kemal Önder; Department of Civil Engineering (2009)
In the last three decades, seismic performance assessment of buried structures has evolved through the following stages : i) buried structures are not prone to seismically-induced damages, thus no need for detailed investigations, ii) eliminating soil-structure-earthquake interaction and use of seismically-induced free field ground deformations directly as the basis for seismic demand, thus producing conservative results, and finally iii) soil-structure and earthquake interaction models incorporating both k...
A case study on development of flood mitigation measures
Durğut, Aybike Ceren; Yanmaz, Ali Melih; Department of Civil Engineering (2023-1-25)
Severe floods have negative impacts on the infrastructural facilities in residential areas and inconveniences to socio-economical conditions. Therefore, it is a must to mitigate these adverse effects by implementing some structural measures. This study deals with the proposal of some detention basins in the upstream part of a critical area, which is located between the embankments of Ankara-Eskişehir highway and Ankara-İstanbul conventional railway. It is intended to offset the possibility of overtopp...
A Comparative study of AISC360 and EC3 provisions for member stability
Kevran, Ömer; Topkaya, Cem; Department of Civil Engineering (2016)
The purpose of this thesis is to compare the stability provisions of AISC360 and EC3 specifications. AISC360 specification introduces two methods for member stability which are Effective Length Method (ELM) and Direct Analysis Method (DM). ELM uses effective length factor (K) which is a function of support and side-sway conditions and directly influences the buckling load. On the other hand, DM assumes the effective length factor K=1 for all support conditions. Moreover, due to inelasticity, DM uses reduced...
A Cost Analysis for Ammonia as a Hydrogen Carrier
Aslan, Mustafa Yasin; Akbayrak, Serdar; Özkar, Saim; Üner, Deniz (null; 2017-10-19)
A Multi-perspective Analysis of Social Context and Personal Factors in Office Settings for the Design of an Effective Mobile Notification System
ÇAVDAR, ŞEYMA; Taşkaya Temizel, Tuğba; Musolesi, Mirco; Tino, Peter (2020-03-01)
In this study, we investigate the effects of social context, personal and mobile phone usage on the inference of work engagement/challenge levels of knowledge workers and their responsiveness to well-being related notifications. Our results show that mobile application usage is associated to the responsiveness and work engagement/challenge levels of knowledge workers. We also developed multi-level (within- and between-subjects) models for the inference of attentional states and engagement/challenge levels w...
Citation Formats
M. Kutay, “A work study for steel modular form panels and production cost control,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr