Design optimization, control and experimental characterization of flapper mechanism with amplified piezo actuator

Date

2017-03-23

Author

Temeltürk, İhsan Burak
Şahin, Melin

Metadata

Show full item record

Item Usage Stats

63
views

0
downloads

URI

https://www.omicsonline.org/conference-proceedings/smart-materials-2017_scientifictracks-abstracts.digital/files/assets/basic-html/page-1.html
https://hdl.handle.net/11511/74333

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Design optimization of a laser path length controller through numerical analysis and experimental validation Fenercioglu, Tevfik Ozan; Yalçınkaya, Tuncay (IOS Press, 2019-01-01) As an integral part of Strapdown Inertial Navigation Systems, ring laser gyroscopes (RLG) are exposed to joint loading conditions where thermal, static and dynamic loads occur simultaneously. The effects of different loading conditions on overall RLG performance should be addressed in parallel for an optimum design. A crucial aspect in this process is the development of the path length controller (PLC), consisting of a mirror, a composite piezo electric bending actuator and other motion transfer elements. T...
Design optimization of variable frequency driven three-phase induction motors Ertan, B; Leblebicioğlu, Mehmet Kemal; Simsir, B; Hamarat, S; Cekic, A; Pirgaip, M (1998-01-01) An approach to optimize the design of three-phase induction motors for a wide speed range drive is considered. Two operating points in the speed range are taken into consideration. The problem is handled as a constrained optimization problem. An accurate model for the motor in terms of its dimensions has been developed which predicts the motor performance based on about 60 parameters of motor geometry.
Design optimization of rocket nozzles in chemically reacting flows Yumusak, M.; Eyi, Sinan (2012-07-30) The objective of this study is to develop a reliable and efficient design tool that can be used in chemically reacting flows. The flow analysis is based on the axisymmetric Euler and the finite rate chemical reaction equations. The finite rate chemistry model includes eight species and eleven reaction equations. These coupled equations are solved by using Newton's method. Both the numerical and the analytical methods are used to calculate the Jacobian matrices. Sensitivities are evaluated by using the adjoi...
Design optimization of a fully integrated charge-pump with LC tank oscillator for ultra-low voltage energy harvesting Jayaweera, H. M. P. C.; Muhtaroglu, Ali (2017-01-01) Model based optimization of a novel integrated interface circuit topology is presented for low voltage DC-DC step-up conversion. A cross-coupled charge pump is implemented in standard 0.18 mu m CMOS technology using an integrated LC tank oscillator to enable a compact, low cost, self-starting solution with maximum efficiency at ultra-low input voltage levels available from embedded micro-power generators. The voltage doubling oscillator can start up with input as low as 0.10 V. Full system can step 0.2 V up...
Design implementation of an electrophysiological data acquisition and analysis system Sezen, Kumsal Deniz; İder, Y.Ziya; Department of Electrical and Electronics Engineering (1991)

Citation Formats

İ. B. Temeltürk and M. Şahin, “Design optimization, control and experimental characterization of flapper mechanism with amplified piezo actuator,” 2017, Accessed: 00, 2021. [Online]. Available: https://www.omicsonline.org/conference-proceedings/smart-materials-2017_scientifictracks-abstracts.digital/files/assets/basic-html/page-1.html.