Numerical Investigation on Cooling of Small Form Factor Computer Cases

Date

2007-11-11

Author

Orhan, Ö Emre
Tarı, İlker

Metadata

Show full item record

Item Usage Stats

45
views

0
downloads

URI

https://hdl.handle.net/11511/74550

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Numerical Investigation on Cooling of Small form Factor Computer Cases ORHAN, OMER EMRE; Tarı, İlker (2008-11-01) In this study, cooling of small form factor computers is numerically investigated. The problem is a conjugate heat transfer problem in which ambient air is the final heat transfer medium. In modeling the problem, heat transfer using heat pipes running from the CPU to the heat exchanger in the back end of the chassis, forced convection inside the chassis, ventilation of the chassis air, conduction paths inside the chassis, and natural convection from the chassis walls to the ambient air are considered. The n...
Numerical investigation on cooling of small form factor computer cases Orhan, Ömer Emre; Tarı, İlker; Department of Mechanical Engineering (2007) In this study, cooling of small form factor computer is numerically investigated. The numerical model is analyzed using a commercial computational fluid dynamics software Icepak™ . The effects of grid selection, discretization schemes and turbulence models are discussed and presented. In addition, physical phenomena like recirculation and relaminarization are addressed briefly. For a comparison with the computational fluid dynamics results, an experiment is conducted and some temperature measurements are ob...
Numerical investigation of rotor wake-stator interaction Gürak, Derya; Akmandor, İbrahim Sinan; Department of Aerospace Engineering (2004) In this thesis, numerical solutions of a 2D stator compressor cascade at a given inlet Mach number (0.7) and four values of incidence (49°, 51°, 53° and 55°) are obtained. Reynolds averaged, thin layer, compressible Navier Stokes equations are solved. Different grid types have been generated. Finite differencing approach and LU - ADI splitting technique are used. Three block parallel Euler and Navier Stokes solutions are compared with the experimental results. Baldwin-Lomax turbulence model is used in the t...
Numerical analysis of thermo-mechanical behavior in flow forming Günay, Enes; Fenercioglu, Tevfik Ozan; Yalçınkaya, Tuncay (2021-01-01) Flow forming is a metal forming process for cylindrical workpieces where high velocity deformation leads to radial thinning and axial extension. In the current study, a thermomechanical, dynamic and explicit finite element model of a flow forming process is developed on ABAQUS software. The model is validated through the comparison of reaction forces and geometry obtained from the experiments. Coolant convection effect is analyzed in conjunction with roller and mandrel conduction cooling to study the therma...
Numerical investigation of forced convection thermal management of high power electronics on a rotary platform Anıl, Calıskan; Tarı, İlker (null; 2015-08-12) An package on a rotary platform including two components with 600 W, one component with 350 W and one small component with 70 W heat dissipation rates (1620 W total heat load) is numerically and experimentally investigated under steady state conditions. In order to avoid rotary joints and to reduce the cost, the thermal management solution for the heat dissipation is placed entirely on the rotary platform. The thermal management solution consists of heat sinks attached on vertical side surfaces of the platf...

Citation Formats

Ö. E. Orhan and İ. Tarı, “Numerical Investigation on Cooling of Small Form Factor Computer Cases,” 2007, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74550.