Investigation of Evaluation of Aluminum Film during Aluminum Induced Glass Texturing Process

Date

2016-06-02

Author

Ünal, Mustafa
Sökmen, İlkay
Turan, Raşit

Metadata

Show full item record

Item Usage Stats

101
views

0
downloads

URI

http://www.nanotr12.org/NanoTR12_AbstractBook.pdf
https://hdl.handle.net/11511/75006

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Sıcak-Nemli̇ İkli̇mde Çi̇ft Kabuk Cephe Enerji̇ Performansının İncelenmesi̇ Göksal Özbalta, Türkan; Yıldız, Yusuf (Middle East Technical University, Faculty of Architecture, 2019-9-25) In buildings, which have a significant share of energy consumption, the proper construction and design of the building envelope is an important issue on all countries due to environmental problems and energy supply. Therefore, controlling the heat loss/gain from the building envelope is an inevitable necessity when considering the increasing building stock in Turkey. Reducing the amount of energy consumed in both new and existing buildings leads to new environmental and climate-sensitive approaches. Double ...
Investigation of microstructure inhomogeneity in SiCp-reinforced aluminum matrix composites Gacsi, Zoltan; Gür, Cemil Hakan; Makszimus, Andrea; Pieczonka, Tadeusz (2007-01-01) The type, volume fraction, size, shape and arrangement of embedded particles influence the mechanical properties of the particle reinforced metal matrix composites. This presents the investigation of the SiC particle and porosity distributions in various aluminum matrix composites produced by cold- and hot-pressing. The inicrostructures were characterized by optical microscopy and stereological parameters. SiC and porosity volume fractions, and the anisotropy distribution function were measured to establish...
Investigation of mottling in radiography of directionally solidified ni-based alloy gas turbine blades Aygün, Hacer; Selçuk, Ekrem; Department of Metallurgical and Materials Engineering (1996)
Investigation of temperature profile in high temperature PEM fuel cell Çağlayan, Dilara Gülçin; Eroğlu, İnci; Devrim, Yılser; Department of Chemical Engineering (2016) High temperature polymer electrolyte membrane fuel cells (HT-PEMFC) are promising alternative energy sources for the future. As an advantageous tool in the design of a system, modeling requires less time compared to the experiments as well as its low cost. This study includes both isothermal and non-isothermal three-dimensional mathematical models for a HT-PEMFC having an active area of 25 cm2. Governing equations are solved by using Comsol Multiphysics 5.0 “Batteries & Fuel Cells” module, which is a commer...
Investigation of weight reduction of automotive body structures with the use of sandwich materials Hara, Deniz; Özgen, Gökhan Osman (Elsevier BV; 2016-04-21) The use of sandwich materials in automobile body panels is investigated in this study. In the first part, floor, luggage, firewall and rear wheel panels of a car body-in-white are replaced with panels made of sandwich materials in order to reduce the weight. Final sandwich material configurations are obtained through a trial and error based optimization approach where weights of the panels are minimized while keeping bending stiffness performances of the panels same. In the second part, the use of sandwich ...

Citation Formats

M. Ünal, İ. Sökmen, and R. Turan, “Investigation of Evaluation of Aluminum Film during Aluminum Induced Glass Texturing Process,” 2016, Accessed: 00, 2021. [Online]. Available: http://www.nanotr12.org/NanoTR12_AbstractBook.pdf.