Jeotermalde Yerbilimsel Uygulamalar

Date

2002-01-01

Author

Güleç, Nilgün Türkan

Metadata

Show full item record

Item Usage Stats

126
views

0
downloads

URI

https://hdl.handle.net/11511/76254

Collections

Unverified, Book / Book chapter

Suggestions

OpenMETU
Core

Jeotermal Kaynakların Aranmasında Gaz Jeokimyası Çalısmaları Great Artesian Basin GAB Avustralya ve Amik Ovası Hatay Örnekleri YÜCE, GALİP; Italiano, Francesco; Yalcin, Tolga H.; UYSAL, IBRAHIM TONGUC; Yang, Frank; Fu, Ching-Chou; ROJAY, FUAT BORA; KARABACAK, VOLKAN; D’Alessandro, Walter; Bellomo, Sergio; MORELLI, Guia; GASPARON, Massimo; CHUN-WEI, Lai; Gulbay, Ahmet H.; Yasin, Didem U.; Özacar, Atilla Arda; WALIA, Vivek; ÖZYURT, NACİYE NUR; ERDOĞAN, Ayberk; et.al. (2012-11-08)
Jeotermal sahalarda fraktal analiz yöntemiyle çatlak karakterizasyonu Gürel, Emrah; Akın, Serhat (null; 2015-05-27) Jeotermal sahalarda jeotermal potansiyel hesaplanırken rezervuar hacmi en önemli parametrelerden biridir. Doğru bir rezervuar hacmi için gözeneklilik değeri ve dağılımının bilinmesi gerekir. Batı Anadolu’da bulunan jeotermal rezervuarlar çatlaklı sistemlerden oluşmaktadır. Bu tip sistemlerde depolama ve akış doğal çatlak ağı içinde olmaktadır. Çatlak ağının heterojen ve süreklilik göstermeyen yapısı nedeniyle kapsamlı biçimde karakterizasyonlarına gerek vardır. Türkiye’de çoğu zaman yüksek sıcaklık ve maliy...
Comprehensive approach to torque and lost circulation problems in geothermal wells in terms of drilling fluid Sönmez, Ahmet; Kök, Mustafa Verşan; Department of Petroleum and Natural Gas Engineering (2020-7) Drilling in a lost circulation zone has long been a challenge in geothermal wells due to its strong potential for high torque and wellbore instability. Excessive torque and friction values cause overpull, pipe stuck and severe problems ending up with losing the well in some cases. High temperature-high pressure (HTHP) drilling fluids design; which minimize loss rates and friction values, is critical for the success of these challenging drilling practices. Known fact is that, oil/synthetic based drilling flu...
Uncertainty quantification by using stochastic approach in pore volume calculation for geothermal reservoir Gürel, Emrah; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2015) This study will present the application of a stochastic approach and experimental design techniques to a geologic system in order to quantify the uncertainty of pore volume estimations for a liquid dominated high temperature geothermal reservoir. The pore volume is a key element when defining the total resource available in the field. Alasehir geothermal reservoir pore volume uncertainty has been assessed. The uncertainties being addressed include geometry (top of reservoir and base of reservoir), reservoir...
Estimation of the formation temperature from the inlet and outlet mud temperatures while drilling geothermal formations Tekin, Sema; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2010) Formation temperature is an important parameter in geothermal drilling since it affects all the components of the system such as drilling fluid, drilling operations and equipment through mud temperatures. The main objective of this study is to estimate the formation temperatures of five geothermal wells in Germencik-Ömerbeyli geothermal field by using inlet and outlet mud temperatures obtained during drilling. For this purpose, GTEMP, a wellbore thermal simulation model is used to simulate the process of dr...

Citation Formats

N. T. Güleç, Jeotermalde Yerbilimsel Uygulamalar. 2002.