Load and convergence measurements in longwall faces at Bigadic-Simav mine and recommendations for hydraulic face props

Download

002935.pdf

Date

1988

Author

Özel, Reha

Metadata

Show full item record

Item Usage Stats

67
views

0
downloads

URI

https://hdl.handle.net/11511/7648

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Load and convergence measurements and support design at longwall faces of Alpagut-Dodurga lignite (ADL) mine Doğan, Veli; Karpuz, Celal; Department of Mining Engineering (1990)
Load rating of concrete-deck-on-steel-stringer bridges using field-calibrated 2D-grid models Türer, Ahmet (Elsevier BV, 2011-04-01) This paper presents and discusses issues related to structural identification, calibrated model-based load rating, and sensitivity of rating to the analytical model, along with experimental studies conducted on an existing concrete-deck-on-steel-stringer bridge. The proposed model-updating procedure uses collected dynamic data (mode shapes, modal frequencies, and order of modes) as well as static deformed shape information. Two-dimensional (2D) grid models were developed to successfully simulate the transve...
Load Reduction in Wind Turbines with Bend-Twist CoupledBlades without Power Loss at Underrated Wind Speeds Atalay, Oğuz; Kayran, Altan (null; 2018-01-01) Usage of composite materials in wind turbine blades is a passive mechanism to alleviate fatigue loads besides the reduction in the mass of the wind turbine system. Off-axis plies in bend-twist coupled (BTC) blades account for the passive fatigue load reduction by reducing the effective angle of attack of blade sections. Reduction in fatigue loads is generally represented by damage equivalent load ratios. In the present study, multibody aeroelastic analyses are performed for wind turbine systems for the unde...
Load transfer capacity of doweled joints in concrete roads under static loading. Tarım, Güzin; Department of Civil Engineering (1971)
Strain measurement on soft materials by means of clip gages İpek, Gürol; Tekkaya, A. Erman; Department of Mechanical Engineering (1996)

Citation Formats

R. Özel, “Load and convergence measurements in longwall faces at Bigadic-Simav mine and recommendations for hydraulic face props,” Middle East Technical University, 1988.