Finite Element Analysis of Interfacial Shear Strength Measurements Performed on Nanolayered Metals

Date

2019-08-22

Author

Kepenekci, Mehmet
Özerinç, Sezer

Metadata

Show full item record

Item Usage Stats

69
views

0
downloads

URI

https://hdl.handle.net/11511/76979

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Finite Element Analysis of Interfacial Shear Strength Measurements Performed on Nanolayered Metals Kepenekci, Mehmet; Özerinç, Sezer (2019-8-22-23)
Finite element analysis of fretting contact for dissimilar and nonhomogeneous materials Korkmaz, Yezdan M.; Çöker, Demirkan (Elsevier BV; 2017-09-07) Fretting problem arises in the case of relatively small sliding motion between contacting surfaces leading to reduction in fatigue life of these parts significantly. The purpose of this study is to investigate the effects of fretting on the contact region in a cylindrical on flat contact configuration. In order to identify fretting contact, a finite element (FE) model was constructed by using commercial finite element package ABAQUS (TM). Fretting contact is studied under two types of loading: tangential lo...
Finite element analysis of fretting contact for nonhomogenous materials Korkmaz, Y. M.; Çöker, Demirkan (2017-09-15) Fretting problem arises in the case of relatively small sliding motion between contacting surfaces. Fatigue life of the components that are in contact with each other, especially in rotorcraft may be significantly reduced due to fretting. The purpose of this study is to investigate material inhomogeneity near the contact region on the fretting problem in a cylindrical on flat contact configuration. A finite element (FE) model was constructed by using commercial finite element package ABAQUS (TM) to study pa...
Finite Element Analysis of Springback in Bending of Aluminium Sheets ESAT, VOLKAN; Darendeliler, Haluk; Gökler, Mustafa İlhan (2001-02-15)
Finite element analysis of springback in bending of aluminium sheets Esat, V; Darendeliler, Haluk; Gokler, MI (2002-04-01) Bending is one of the processes frequently applied during manufacture of aluminium components. The bending operation involves springback, which is defined as elastic recovery of the part during unloading. In manufacturing industry, it is still a practical problem to predict the final geometry of the part after springback and to design appropriate tooling in order to compensate for springback. In this paper, commercially available finite-element analysis (FEA) software is used to analyse bending and springba...

Citation Formats

M. Kepenekci and S. Özerinç, “Finite Element Analysis of Interfacial Shear Strength Measurements Performed on Nanolayered Metals,” 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76979.