Investigation of the effect of boundary conditions on the buckling coefficients of stiffned flat panels

2017-09-22
Aydın, Enes
Kayran, Altan
Show full item record
120
views
0
downloads
https://hdl.handle.net/11511/77314
Ankara International Aerospace Conference, ( 20 - 22 Eylül 2017)
Unverified, Conference / Seminar

Suggestions

INVESTIGATION OF THE EFFECT OF LAMINATE STIFFNESS ON BEARING/BYPASS LOADS FOR BOLTED COMPOSITE JOINTS
Candan, Korhan; Kayran, Altan (2021-09-10)
Investigation of the properties of biaxially oriented polypropylene films
Yüksekkalaycı, Celal; Yılmazer, Ülkü; Department of Chemical Engineering (1995)
Investigation of the effects of equal channel angular extrusion on light weight alloys
Karpuz, Pınar; Gür, Cemil Hakan; Karaman, İbrahim; Department of Metallurgical and Materials Engineering (2012)
Severe plastic deformation methods are of great interest in industrial forming applications, as they give rise to significant refinement in microstructures and improvements in mechanical and physical properties. In the “Equal Channel Angular Extrusion (ECAE)”, which is the most common method for production of ultrafine grained bulk samples, very high plastic strains are introduced into the bulk material without any change in cross section. This study is composed of two main parts. Part I focuses on the plas...
INVESTIGATION OF VARIATION OF TRIAXIALTY AND LODE ANGLE PARAMETER VALUES IN SHEET METAL FORMING PROCESSES
Güzelderen, Tolunay; Darendeliler, Haluk; Department of Mechanical Engineering (2022-8-29)
The aim of this study is to find out the relations of stress triaxiality and Lode angle parameter with the deformation characteristics of deep drawing process. For this purpose, deep drawing process is analyzed numerically by using different yield criteria, ductile criteria and hardening models for two different sheet materials. The simulations are carried out by using the finite element method. Square and cylindrical cups made of Al-2024 aluminum and AISI 304 steel are formed. Von Mises and Hill48 yield cr...
INVESTIGATION OF CONDUCTIVITY CHARACTERISTICS OF Zn-In-Se THIN FILMS
Gullu, H. H.; Parlak, Mehmet (World Scientific Pub Co Pte Lt, 2020-01-01)
Zn-In-Se thin films were fabricated on the ultrasonically cleaned glass substrates masked with clover-shaped geometry by thermal evaporation of its elemental sources. Temperature-dependent conductivity characteristics of the films were investigated under dark and illuminated conditions. The semiconductor type of the films was found as n-type by thermal probe test. According to the van der Pauw technique, the dark electrical conductivity analyses showed that the variations of conductivity of unannealed and a...
Citation Formats
E. Aydın and A. Kayran, “Investigation of the effect of boundary conditions on the buckling coefficients of stiffned flat panels,” presented at the Ankara International Aerospace Conference, ( 20 - 22 Eylül 2017), Ankara, Türkiye, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77314.
METU IIS - Integrated Information Service open@metu.edu.tr