Optimization of the unit coal burner stove

Date

1975

Author

Ustaoğlu, Cavit

Metadata

Show full item record

Item Usage Stats

119
views

0
downloads

URI

https://hdl.handle.net/11511/7831

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Optimization of the unit wood burner stove. Bilir, Şefik; Department of Mechanical Engineering (1982)
Optimization of Speed Control Hump Profiles BAŞLAMIŞLI, SELAHATTİN ÇAĞLAR; Ünlüsoy, Yavuz Samim (2009-05-01) In this study, the goal attainment method is implemented for the optimization of speed control hump profiles. Basic dimensions for a number of hump profile functions are optimized for single vehicles classified in five categories and for a specified distribution of these vehicles. Objective functions are selected as combinations of the longitudinal and vertical acceleration components at pre-specified points on the vehicle body. The main objective is to minimize vehicle response functions below the hump cro...
Optimization of speed control hump profiles Başlamışlı, S. Çağlar; Ünlüsoy, Y. Samim; Department of Mechanical Engineering (2001)
Optimization of the aquifer remediation costs and design with pulsed pumping Aksoy, Ayşegül (null; 1999-06-10) (No paper) Pump-and-treat is a common technique for the remediation of contaminated aquifers. However, slow kinetic mass transfer at sites contaminated with organic compounds may reduce the efficiency of the pump-and-treat remediation. Although continuous pumping tends at first to remove high concentrations from an aquifer, it soon removes much lower concentrations due to slow mass transfer from immobile to mobile phases. Pulsed pumping, in which the pump is periodically turned off, has been suggested as a ...
Optimization of a microbolometer pixel for operation in the sub-1 THz region Demirörs, Oytun; Atik, Bahar; Dirican, Emrah; Altan, Hakan; Esentürk, Okan; Ylldlrlm, Mustafa; Akın, Tayfun (2021-01-01) Imaging in the Terahertz (THz) region has drawn attention in recent years, but the nature of the THz frequency regime causes some drawbacks in imaging such as long wavelength, high cost, and low emission levels at room temperature. Because of the high atmospheric absorption of THz waves, fabrication of a microbolometer pixel that works in the sub-1 THz frequency regime is necessary. Large pixel pitches due to longer wavelengths and the resulting higher thermal mass pose a difficult challenge. Due to those l...

Citation Formats

C. Ustaoğlu, “Optimization of the unit coal burner stove,” Middle East Technical University, 1975.