Synthesis and Characterization of Al RE TM Nanocrystal Amorphous Nanocomposites

2015-07-13
Kalay, Yunus Eren
Show full item record
81
views
0
downloads
https://hdl.handle.net/11511/79600
ISMANAM 2015, 13 Temmuz - 17 Aralık 2015
Unverified, Conference / Seminar

Suggestions

Synthesis and characterization of Pd-MCM-type mesoporous nanocomposite materials
Şener, Canan; Doğu, Timur; Department of Chemical Engineering (2006)
Noble metal incorporated MCM-41 based nanostructured mesoporous materials have attracted the attention of material researchers in recent years. Sorption characteristics of MCM materials can be improved by surface modification techniques. Besides surface modification, metal nanoparticles can also be produced within the pores of mesoporous materials. MCM-41 can act as host for several metal nanoparticles such as palladium. The present study is focused on the synthesis of Pd-MCM-41 nanocomposite catalytic mate...
Synthesis and Characterization of Bulk Amorphous Nanocrystalline Soft Magnetic Materials
Karataş, Merve; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (null; 2016-10-01)
(Fe36Co36B19.2Si4.8Nb4)99.25Cu0.75 bulk glassy rod with 3 mm diameter was synthesized by copper mold casting method and structural characterization of as cast sample was carried out. The non-isothermal differential scanning calorimetry (DSC) measurements were used for investigating the crystallization kinetics of the alloy. Kinetic parameters of process were determined by Kissinger and Ozawa methods. Isothermal DSC measurements ...
Synthesis and characterization of polystyrene clay nanocomposites
Özden, Gülsüm; Yılmazer, Ülkü; Department of Chemical Engineering (2004)
This study was undertaken to prepare polystyrene (PS)/montmorillonite (MMT) nanocomposites by different methods, including melt intercalation, in-situ polymerization and masterbatch methods. The in-situ polymerization method consisted of dispersing the styrene monomer into the galleries of MMT followed by subsequent polymerization. The PS/MMT nanocomposites formed by melt intercalation method were prepared on a twin-screw extruder. The masterbatch method was in fact a two-step process. As the first step, a ...
Synthesis and characterization of boron-doped Bi2O3-La2O3 fiber derived nanocomposite precursor
Durmusoglu, Senol; Uslu, Ibrahim; TUNÇ, TUNCAY; Keskin, Selda; Aytimur, Arda; Akdemir, Ahmet (Springer Science and Business Media LLC, 2011-11-01)
Boron doped poly(vinyl) alcohol/ bismuth - lanthanum acetate (PVA/Bi-La) nanofibers were prepared by electrospinning using PVA as a precursor. The effect of boron doping was investigated in terms of solution properties, morphological changes and thermal characteristics. The fibers were characterized by FT-IR, XRD, SEM and BET. The addition of boron did not only increase the thermal stability of the fibers, but also their diameters, which yielded stronger fibers. XRD analyses showed that boron doping increas...
Synthesis and characterization of poly(ether/ester) based thermoplastic elastomer nanocomposites
Ezeroğlu, Fadile; Yılmazer, Ülkü; Department of Polymer Science and Technology (2013)
In this thesis, there are three goals; to synthesize Poly(ether/ester)s (PEEs) based on Poly(butylene terephthalate) (PBT) and Poly(ethylene glycol) (PEG) by changing the soft segment / hard segment compositions and investigate the influence of hard segment length on the structure, to synthesize PEE nanocomposites by in-situ polymerization and observe the effects of introduction of modified organoclay at different ratios to the polymer matrix, and thirdly, to prepare PEE nanocomposites by melt intercalation...
Citation Formats
Y. E. Kalay, “Synthesis and Characterization of Al RE TM Nanocrystal Amorphous Nanocomposites,” presented at the ISMANAM 2015, 13 Temmuz - 17 Aralık 2015, 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79600.
METU IIS - Integrated Information Service open@metu.edu.tr